Making a LST2 into a Truggy

[Bondonutz]

Got the center CVD's done today, what a bitch making them true !
I decided to go with the stock arms rather than the lower Dynamites for the first runs I see how durable it'll be. Should be just fine and much lighter ?
Aside from missing a shock tower I'm gonna start a final assembly tonight and see where I get ?
Still want to make a brace to support the CD assembly, nothing special, just something keep it steady for frontal impacts.
I bought a used 2000KV Tekin motor from a fellow RCM member and I think it might be the better power plant for this application, open to sugestions and opinions ????





As I work on getting all my electronics in I will be blacking out all the wires to help make everything nice and tidy. In case anyone is wondering what servo I'm gonna run it's a JR-DS8711.

[pinkpanda3310]

Originally Posted by Bondonutz

Still want to make a brace to support the CD assembly, nothing special, just something keep it steady for frontal impacts.

Is the top of your diff mount the same as the upper level of the bulks? You seem to have a bit of cf lying around- custom make a top plate with a narrow part running past the servo back to the diff mount.

[Bondonutz]

Originally Posted by pinkpanda3310

Is the top of your diff mount the same as the upper level of the bulks? You seem to have a bit of cf lying around- custom make a top plate with a narrow part running past the servo back to the diff mount.

I was in the middle of figureing that out when you posted. Heres what I was thinking.