Calibration problem

[suicideneil]

I wouldnt think the switch/ lack there of one would make a difference, just seems like certain rxs have some bad juju with signal strengths/voltages or something like that ( recent thread with a guy from europe who had a futaba rx that didnt like the MMM- only that particular model of rx was a known issue... ). If you've got friends with different rx by speky, or an lhs near by etc, see if you can work anything out with a different rx...

Hmm...I'll try one of my standard Grey DSM RX's to calibrate the MM.....

Nope, this is driving me insane now! Got the MMM to work fine by using FW V1.21, no worries there as it calibrated fine.

I have tried all sorts with the MM and my KO radio and just not having any of it to calibrate. I have tried increasing/decreasing EPA's, sub trims, trims, TDB on the ESC, all sorts. Plugged in a servo into the RX, worked a charm, throw looks great, no issues. Tried reversing the throttle channel, no luck at all. I have no ABS or anything fancy on the radio setup either.

Occurred to me that during use, I've never seen either the red or yellow LED light up at all, at any point, even during startup? is that normal? Beginning to think my MM has a problem maybe?

Going to have one last try to calibrate it using an old RTR 27mhz radio I have at home...if that doesn't work then might send it back to CC, as then I'll be pretty sure it has issues....the fast i've never seen the red or yellow LED's light up, ever, has me thinking it's more than just a weird radio syncing issue.....