CORR Truck (Short Course) Usage Advisory

[Losi LST2]

Hey guys if i want to run the 2650kV on 3s in my slash 4x4 what would be the lowest "C" rating that i need?...20, 25, 30?

I already have a mamba monster ESC i'm thinking about buying the 2650 to pair up with it and throw in the slash

And also with the slash geared for about 35mph will this setup stay nice and cool?

[suicideneil]

Originally Posted by Losi LST2

Hey guys if i want to run the 2650kV on 3s in my slash 4x4 what would be the lowest "C" rating that i need?...20, 25, 30?

I already have a mamba monster ESC i'm thinking about buying the 2650 to pair up with it and throw in the slash

And also with the slash geared for about 35mph will this setup stay nice and cool?

Lipos capable of 120amps or more are required, as per stated in the manual.

As for temps, it should do just fine, but check reguarly during the first run or two with an IR temp gun:

motor = 180*F max, ideally 120-160
esc = about the same, ideally 100-140
lipos = 140*F max, ideally 120 or less