Ultimate UE-G4...

[_paralyzed_]

spin that diff, face the motor forward for better weight distribution.

Looks sick!!!!!!!!

[respirologyrc]

Here is what i have in the truck:
UE 6 spyder diffs
UE alum turnbuckles
UE RcX
UE 6mm CVD's
UE Knuckle Heads
UE Ti Pillow Balls
UE Servo Saver Gen 4

Strobe front and rear braces

RC Monster CD

Dave Wing Mount

14.8v 3000mah 35C batteries ( one on each side so a total mah of 6000)

Proline Bull Dog body

Tony Screws

Avid Ceramic Bearings

I will have to see what else.

I'm running Traxxas Plastic grey bulks because they are light. I do own a VBS but do not want to run it on this truck. I will have to see how this thing feels before i go ahead swapping out parts for racing purposes. I intend on running this with truggies.

[_paralyzed_]

Originally Posted by respirologyrc

I intend on running this with truggies.

I really think you'll want to spin the cd 180 degrees and have the motor face forward if you plan on racing. It should be as simple as unscrewing the cd and spinning it.

I figure 30,000 wt oil in the cd is a good starting point....

[respirologyrc]

30k in the middle?? I was going to try a more traditional 7k front, 10k middle, 3k rear. What makes you say 30k center? just curious. I've been racing for 5 years and am pretty decent at the clubman level.