Hippie has a new ride - Page 7 - RC-Monster Forums

10.09.2010, 04:21 PM

ya i would just throw that away and start over.

rchippie · 04:47 PM

That is a Trek single track 950. I had that bike in the late 80's & early 90's. It was a AWSOME bike. I dont think i would put any money into it, unless you get a crack deal on some used parts in good shape. When new i believe it cost around $500 - $600. The Derailleurs & cranks were very very good for there time. They still make the LX componets to this day.

BlackWood · 10.09.2010, 05:01 PM

Thanks for the info guys, it is in rough shape and probably not worth saving so off to the scrapyard.

bigboi146 · 11.28.2010, 02:07 AM

Hey hippie how do you like your single speed? It's all I ride now. Here's a couple of pics. The white and black bike is an SE draft without all of the stickers. It has a funny story to it. I went to drop off clothes at the dry cleaners once and it got stolen. After going to the cops they pretty much said that they couldn't do anything for me. After three months and another bike later I found it chained up to a pole about 8 blocks away. After waiting for the "owner" and a long discussion I ended up giving the guy $15 for the bike. He said he bought it so it spared him an butt whooping. lol.

My replacement bike was a windsor clockwork until I changed pretty much every part and repainted it.

rchippie · 11.28.2010, 11:19 AM

It's pretty cool, but it takes a while to get used to the fixed gear

. Both of your fixed gear bike look nice.

bigboi146 · 11.28.2010, 11:09 PM

Thanks. Once you get used to it you might actually like it a lot.

rchippie · 11:38 PM

I just installed a cadence sensor on my fixed gear. So when i use it on my Trainer. I can get a idea of how fast I'm going by reading the cadence. It's a wired computer, so the speed sensor in on the FR wheel. This will be good for my training. I ride my Madone on the Rollers & rode, & my fixed gear on my Trainer.

bigboi146 · 12.02.2010, 11:37 AM

I'm looking to get some type of indoor trainer for x-mas. What's the difference between the two?

rchippie · 09:01 PM

Quote:

Originally Posted by bigboi146

I'm looking to get some type of indoor trainer for x-mas. What's the difference between the two?

These are rollers in action. Over time they will help your balance & handling. Which is great if you do group rides. If you don't pay attention you will pay.

http://www.youtube.com/watch?v=34POOhoXHNw

This is a RR wheel trainer not much fun. You don not have to concentrate for it to work.

http://www.youtube.com/watch?v=hQsk7...x=0&playnext=1

pinkpanda3310 · 12.16.2010, 07:35 AM

The sunday just gone I went out with Dad. I thought YOU BEAUTY give it the beans. I don't think Dad was expecting to be struggling to keep up

but I was only good for an hour, then I was happy to keep up with him.

I think my stamina is good for 1 hour as that's how long gym class goes for. Anyway we only averaged 27km/h. I was hoping for more but I think I did OK. Dad decided to get back into routine and ride everyday. I went with him and his coffee friends this morning. Not much of a ride, a casual 20km. He talked a little to one of his friends about an old bike he had. I got the impression Dad wanted me to have my own bike.

I was right. The big news of today- he rings me at work and asks if I've got time to go see him 'meet me at the bike shop' he said. So the manager of the bike shop fitted me with a bike of my own

Being Dads LBS and a regular he got some discount on the stuff we got which was bike and stuff to fit to the bike ie- pedals to suit my shoe clips, bottle holder, bottle, bag, tire levers, spare tube, pump.

The pic in the link doesn't show up the blue very well.
http://www.fleetcycles.bikeit.com.au...ti-avanti-giro

The only bad thing I can think out of all this is now I have to do all my own maintenance. I quite enjoyed going and riding his bikes then not worrying about whats wrong with them. I know that's sounds like a gripe but why would i look a gift horse in the mouth. At least now I can ride from home when I get the chance.

rchippie · 12.16.2010, 02:47 PM

You need to work on your Drafting. By doing this you save any were from 20% - 30% of your energy. Also when it's your turn for a pull at the Front. Try & keep the same pace as when you were Drafting, & don't burn your self out trying to do a long pull. If you can only pull for a mile or so that's fine. Also be sure to signal the rider behind you before you pull off, so you your pace line doesn't develop a gap . Most people do this by tapping there right hip a couple of times to let the rider behind you know that your pulling off. Your new bike looks good.. I will look at the pics better when i get home from work.

pinkpanda3310 · 12.16.2010, 07:48 PM

The drafting thing works much better in bigger groups doesn't it? When it's just the 3 of us we sometimes have to wait up for the third member

I'll get around to doing a decent group ride soon I think. I also didn't care to draft off Dad as I wanted to push myself. I did have to ease up for him but I think that was a good thing or I would have burnt myself out like you said. I went out with him again this morning, only 25km but I think it was a good pace (don't have a computer yet). It sorta depends on work as to how much I can ride during the week because it makes me a little late for work

bigboi146 · 12.16.2010, 09:01 PM

Hey guys got some bike updates myself. I have two gifts coming in. Some Nashbar rollers and training tires to go with it. Can't wait to fall.

rchippie · 12.16.2010, 09:21 PM

Quote:

Originally Posted by bigboi146

Hey guys got some bike updates myself. I have two gifts coming in. Some Nashbar rollers and training tires to go with it. Can't wait to fall.

What rollers did you get, & have you ever ridden rollers before ?. If not i would strongly suggest using them in a hallway or doorway. They can be tricking until you get the hang of them. I would also suggest not using your toe clips, until you get the hang of the rollers. I can give you tips if you need help.

bigboi146 · 09:44 PM

I have these. And yes first time riding rollers. I have a good place with walls on both sides that im pretty sure would be perfect for learning. Also any tips are greatly appreciated.