RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Brushless

Reply
 
Thread Tools Rate Thread Display Modes
Old
  (#1)
nativepaul
RC-Monster Aluminum
 
nativepaul's Avatar
 
Offline
Posts: 522
Join Date: Jan 2007
Location: Sussex, England.
09.07.2010, 03:27 PM

It depends what you are after, if you are sending pictures in to the mags to have their photographer come and take pictures of your car the "naked chassis" photos are fine, if you are trying to get your own photos published I would take some more with better lighting, either outdoors in the natural daylight of an overcast day or with a reflector on the flash/ceiling flash indoors so the highlights are more diffuse and not directly towards the camera, also note the above post about having a clutter free scene in the background.

I very much doubt the "Body on" photos will get you featured in a magazine even with a pro photographer, the body is too narrow/track too wide so the wheels/tyres stick out from the body instead of being flush, the body posts are too long all round, I cant tell 100% but the front wheel arches look as thought they may have been cut a little raggedly and need sanding to a smooth curve, the rear wheels look like they are long way from being centred in the wheel arches but maybe that comes from the angle of the photo and the fact that the wheels don't sit flush with the body, the rear wing is either twisted or not cut straight you can see its back edge sloping down on the right hand side (left side in the pics as viewed from the front), aesthetically the paint would look a lot better if the blue cobra stripes were full length and continued along the roof and back end as well as the front it looks a little disjointed as is, I personally don't care for carbon effect trim or paint on a scale body the weave is generally way too big to be scale but I have seen plenty in mags so I doubt it will score you down.

Personally I wouldnt advertise it as being 70+MPH when I had no idea how fast it really is, I don't see this speed bragging based on mates guestimates of your speed as a good way to get into the magazines.

At three minutes four seconds, that's one long video for 39 seconds of footage!


Hot Bodies Lightning 2 Pro carbon, Mega 22/30/2, MMM, 4s3-5Ah.
Tamiya F201 carbon, Mamba 7700, MM, 2s A123 2.3ah.
Xray XT8, 1518, MMM, 4s5Ah.
Lots of boats.
fastelectrics.net
   
Reply With Quote
Wow....
Old
  (#2)
Big House
RC-Monster Carbon Fiber
 
Big House's Avatar
 
Offline
Posts: 372
Join Date: Dec 2007
Wow.... - 09.07.2010, 05:39 PM

Paul,

You did everything but critic the guy's grammar. It is almost likeyou blew the pic up and measured the wheel well and fender spacing as well as the wheel offset. Pretty nice naked pics and yes the body could use some fine touching but dang...you don't even guy the credit for what he did...(off my soapbox)

T-Bro, nice ride. up the Kv a little and go for 80. I am running a MM 7700 on 3s and that is what I am shooting for.


CF Ofna GTP II Extended Chassis Castle/Flux 2200kv 6s
CF Ofna DM-1 Pro CC1717
CF Sportswerks Mayhem ST
CF Losi LST2

Last edited by Big House; 09.07.2010 at 06:08 PM.
   
Reply With Quote
Old
  (#3)
bigboi146
Multi Tasking
 
bigboi146's Avatar
 
Offline
Posts: 320
Join Date: Sep 2006
Location: New York City
09.07.2010, 06:05 PM

Quote:
Originally Posted by nativepaul View Post
It depends what you are after, if you are sending pictures in to the mags to have their photographer come and take pictures of your car the "naked chassis" photos are fine, if you are trying to get your own photos published I would take some more with better lighting, either outdoors in the natural daylight of an overcast day or with a reflector on the flash/ceiling flash indoors so the highlights are more diffuse and not directly towards the camera, also note the above post about having a clutter free scene in the background.

I very much doubt the "Body on" photos will get you featured in a magazine even with a pro photographer, the body is too narrow/track too wide so the wheels/tyres stick out from the body instead of being flush, the body posts are too long all round, I cant tell 100% but the front wheel arches look as thought they may have been cut a little raggedly and need sanding to a smooth curve, the rear wheels look like they are long way from being centred in the wheel arches but maybe that comes from the angle of the photo and the fact that the wheels don't sit flush with the body, the rear wing is either twisted or not cut straight you can see its back edge sloping down on the right hand side (left side in the pics as viewed from the front), aesthetically the paint would look a lot better if the blue cobra stripes were full length and continued along the roof and back end as well as the front it looks a little disjointed as is, I personally don't care for carbon effect trim or paint on a scale body the weave is generally way too big to be scale but I have seen plenty in mags so I doubt it will score you down.

Personally I wouldnt advertise it as being 70+MPH when I had no idea how fast it really is, I don't see this speed bragging based on mates guestimates of your speed as a good way to get into the magazines.

At three minutes four seconds, that's one long video for 39 seconds of footage!
Stop hating on the guy all he was doing was showing us his ride.
   
Reply With Quote
Old
  (#4)
_paralyzed_
working on a brushless for my wheelchair.....
 
_paralyzed_'s Avatar
 
Offline
Posts: 4,890
Join Date: Mar 2007
Location: minnesnowta
09.07.2010, 09:51 PM

don't rustlers do 70 out of the box? tc's hit triple digits easy...


_______________________________________

It's "Dr. _paralyzed_" actually. Not like with a PhD, but Doctor like in Dr. Pepper.
   
Reply With Quote
Reply

Tags
brushless, mph, tc3


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com