elc. conversion project done right... with an 808

[whitrzac]

in 3 weeks I went from middle of the B to 2nd qualifier in the 1/8 class...



has there been any solution to the rear pinion bearing problems? I'v had to replace mine every other week

the MMP+1400+5s 4100mah combo has been getting me 15min but the pack is D E A D after that race... I would bump it to 6s, but finding a 4100mah EP neu cell is proving a little difficult...


buggy wights 3498g with my 4100 5s, and 3443g with my 6s 2650mah

AKA 7.7lbs, and 7.6lbs

I could easily drop another 1/2lb if I would clean it, get a new body(covered in shoogoo) and spend some time/$$ lightening a few parts...