Quote:
Originally Posted by Dj_Sparky
Try disconnecting the servo, try another receiver and radio, and go over the wires to make sure its all connected tight and right.
|
Checked everything just now, everything's connected fine. Tried disconnecting the servo and still had the same problem.
Quote:
Originally Posted by josh9mille
It almost sounds like there is a pebble in the gears or something
|
I don't think there is, everything's sealed and if you put it on a single 6 cell pack, the wheels will spin consistantly as long as you give it 60%+ throttle.
I'm starting to think that the ESC is at fault and I should just return it to get replaced under warranty? Also the front bulkheads have a few 'holes' in them. Like there has been bubbles in the plastic moulds
, interesting.
Threaded Mode
