RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > General Electric

 
 
Thread Tools Rating: Thread Rating: 2 votes, 5.00 average. Display Modes
Prev Previous Post   Next Post Next
Old
  (#10)
E-Revonut
RC-Monster RC8T
 
E-Revonut's Avatar
 
Offline
Posts: 2,554
Join Date: Jan 2008
Location: Syracuse, New York (Camillus)
01.25.2011, 03:57 PM

LVC was set to 6V I beleive, I will have to double check. the end of the run I held the truck still, gave full throttle and pushed the tires into the carpet. Again though, keep in mind this is a pack for an rc18t, here it is spinning a motor that ways almost as much as the whole 1/18 truck! Also this pack is about 3 years old with plenty of runs on it.

Here is an actual run in my rc18t geared 55/17 with a Mamba25/5400kv motor. Again this is a MaxAmps 2s 1550mah pack that has seen plenty of use. This wasn't a full run, my apt is big enough to have much fun in for a whole pack, I took less than 350mah out of the pack. I had a peak Wattage of 151. I also held the truck a couple times just to put some load on the pack cause I coudn't even come close to full speed in my apt.


RC-Monster RC8T 1515 2.5D/MMM/5s RC-M 4500mah
SC10 MMPro 13.5T 2s NeuEnery 5000mah
RC18T Mamba 25/5400kv 2s lipo + 6s NiMh
   
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com