Speed Calculator - RC-Monster Forums

silentbob343 · 02.10.2011, 03:15 AM

Hyper Mini STE
3.9 differential
41 stock spur

BrianG · 02.10.2011, 10:55 AM

Quote:

Originally Posted by E-Revonut

Been awhile since I used the calculator, I noticed a few changes. You took out the 1/8 buggy & truggy typical diffs and replaced them with RC8 and RC8T. There is a problem with this, the RC8 buggy uses a typical truggy diff ratio 4.3:1, so if someone uses the calculator and doesn't know this they may have a problem

No, the "typical" diffs are still there. Look under "miscellaneous". Or, type in "typical" in the search field in the drop-down.

Quote:

Originally Posted by silentbob343

Hyper Mini STE
3.9 differential
41 stock spur

I can add that, but what are the actual tooth counts for the diff gears?

silentbob343 · 02.13.2011, 04:30 AM

Quote:

Originally Posted by BrianG

No, the "typical" diffs are still there. Look under "miscellaneous". Or, type in "typical" in the search field in the drop-down.

I can add that, but what are the actual tooth counts for the diff gears?

10t pinion
39t crown

BrianG · 02.17.2011, 07:34 PM

Quote:

Originally Posted by silentbob343

Hyper Mini STE
3.9 differential
41 stock spur

Are you sure it's 41T? I was looking on Tower to get the pitch and the only spur I could find for the mini STE was 42T Mod1...

silentbob343 · 02.18.2011, 02:58 AM

Quote:

Originally Posted by BrianG

Are you sure it's 41T? I was looking on Tower to get the pitch and the only spur I could find for the mini STE was 42T Mod1...

I'd have to count, but IIRC the 10SC uses a 42t and the STE a 41t. I'll let you know once I count mine.