Castle Neu 1409 1.5Y 2400KV on 8th scale

[outlaw]

Originally Posted by simplechamp

If you want to run the 1409 in a 1/8 buggy-based chassis consider getting a lower kv and running something like 6S 2200-2600mah. It will help keep the current draw low and keep the temps down on the smaller motor. If you want to run 4S consider the Castle-Neu 1415 2400kv and MMP combo. You can dial back the power with torque and/or punch control if needed.

Well the 1415 does have way too much power
I'm not going to 6S
I want a motor around 1000 Watt
I will give the 1409 a try

[FG101C]

I use a 1512 2050kv motor on 3s in my 1/8th truggy. I know most people will say my setup is no good. But it is absolutely perfect for my track.

A track setup is alot different than a bash setup, the 1409 should be good.

[outlaw]

Sounds great

My track is also different to most others

[YOUTUBE]ILNu6Yisgm8[/YOUTUBE]

[outlaw]

I was told to take the 1409 2Y
And this guy knows what he is doing I will follow ...

[outlaw]

Found my final motor

1415 1Y 2400 KV....

3S and this thing flys

Just need the 5mm rotor kit