 |
|
|
|
 |
 |
 |
|
 |
|
(#24)
|
|
RC-Monster Titanium
Offline
Posts: 1,007
Join Date: Apr 2010
|
06.27.2011, 11:47 AM
Ok GUys... i had time to have a closer look and found 2 very small problems!!!
Firstly the ESC is absolutely fine... Secondly the problems.. So many wires are now being used, BEC, Pistix etc... that one of them was bound to come loose, and it turned out to be the ESC wire to pistic connection... I then found, one of my lipos to have a terrible solder joint... So now that was all fixed, i ran it on the weekend, and it was the HOTTEST day of the year so far, and the motor and esc did get hot, but not as hot as other peoples did... IT ran like a champ and i will have vids of the 1520 motor running hard on 9s :) Thanks for the help guys! Pic taken from the weekend 
|
|
|
|
 |
 |
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
Threaded Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
