Team-losi 1/5 scale 4wd shortcorse truck bl setup?

[x-y]

leopard/xerun/ezrun 150a esc + leopard 5692 1000kv + 6s ............ Im sure you dont will need more power for a tt car

[brian015]

Originally Posted by x-y

leopard/xerun/ezrun 150a esc + leopard 5692 1000kv + 6s ............ Im sure you dont will need more power for a tt car

I think you'll want more power than this in the 5ive-T. I was putting more than 4000 Watts through my 19lb 4wd buggy - this will weigh significantly more.

Originally Posted by speedy

But my question is if i can use a 200-250A boat or airplane esc ?

Yes, you could use a boat or plane esc with mechanical brakes and no reverse (plane esc will require a pistix for use with a surface transmitter).

[x-y]

Originally Posted by brian015

I think you'll want more power than this in the 5ive-T. I was putting more than 4000 Watts through my 19lb 4wd buggy - this will weigh significantly more.

yes ..... but your 1527 616gr isnt the same than a 5692 of 880gr ....... the second is much bigger and have much more power/torque

also I have a monster 4x2 of 20lb using a "small" 1717 + 4s and I think use more power is crazy ....... also isnt the same runing in a rc track or bashing in a piece of open land ....... I speaking a good config for a rc track/circuit .....

[brian015]

Originally Posted by x-y

yes ..... but your 1527 616gr isnt the same than a 5692 of 880gr ....... the second is much bigger and have much more power/torque

I wasn't questioning the 5692 really - I have no doubt it could be made to work in a 5th scale.

However, I highly doubt that the 6s 150 esc is up to it - there's no way it can put out the power to run the 5692 in a 5th scale.

Furthermore, how much is the 5ive-T going to weigh? 30lbs? more? I don't think it's going to be anywhere near the 20lb range.

[x-y]

Originally Posted by brian015

I wasn't questioning the 5692 really - I have no doubt it could be made to work in a 5th scale.

However, I highly doubt that the 6s 150 esc is up to it - there's no way it can put out the power to run the 5692 in a 5th scale.

Furthermore, how much is the 5ive-T going to weigh? 30lbs? more? I don't think it's going to be anywhere near the 20lb range.

xerun 150a + 5692 2y + 8s a123 in a 13kg car

http://www.youtube.com/watch?v=LWJ-xnIAsFU