Seemingly not- the esc relays the telemetry data to the rx ( via castle link live ), then the traxxas link software just displays this data on the iPoo. The tx settings can be adjusted & saved on the iPoo, but you don't have direct control over the esc settings from your radio or iPoo- you still need the castlelink/ fieldlink & a PC to make changes to throttle, brakes, timing etc etc.
That's the way I understand it to be anyway.
Oh no no no, Castle Link Live allows for on-the-fly settings changes!!
Patrick del Castillo
President, Principle Engineer
Castle Creations
Oh no no no, Castle Link Live allows for on-the-fly settings changes!!
I am sold on this now! $800 or so for the car and another 100 bucks for an older i touch or iphone. I do think I will pick up some 5k 40c lipos, but that is less than 100 bucks too. Almost every big rc I have done has cost around a grand if you factor in the batts and radio gear.