My Savage 5B conversion by Alza Racing.

[pietrvds]

I'm cutting the arms as we speak, just taking a short break coz the handsaw is killing me but it will be DIY all the way

this is a drawing of how they will look like, can't draw in 3d lol so ,its oldschool with mm paper and a pencil and then scanned it and coloured it :)



shocks will be mounted truggy/buggy style with the shock end in the first cavity with a 4mm screw throughout both cavities, the bolt will be tightened in the second cavity.
Rear arms are slightly different where the hubs are you see the rears are thicker that's because i use the integy HD hub carriers so no need for those silly spacers anymore! 8)

Upper arms will be made when i finish these coz i cant draw them before i tested the lower arms with the shocks then i'll try some designs opf the uppers.

and off we go again!