Waterproof MMM

[Team Pie 420]

I have a MMM V3 I WP Immediately upon receiving it.
I have beat it to piss thermaled it over a dozen times fan kicks on 5 mins into my runs.
I have dipped it and tripped it and That Bad boy still rox your sox.
It started out in a Slash 4x4 with a 2650 running 4S never thermaled there.

Now for the last 6 Mos it has been residing in a xtm rail I modded for maximum BEATABILITY supper beefcake this XTM Rail is with a few mods with a 2200 geared 16/46 on 4S occasional 6S.

The 2650 Is in another rail I aquired by trading a merv.
Scored a Blur ESC (aka MMM that wont accept beta firmware no biggie)off Craigslist for $60.
WP that and it has served for 5 months now exquisitely.

Tape up your HS to keep excessive liquid tape off HS.
Ad caps for insurance IMO.

On my main rail I have cut most the ESC case away and secured it on the HS exposing HS keeping the unit cooler.
That solved my thermaling =).
IMO MMM = Excellent tronics really craptastic case.

I am contemplating potting them next to dump the case altogether and possibly add on a modded HS.
I have some stock AMD CPU coolers that would uberrize cooling if I can separate the HS w/o murdering the fets.

[BrianG]

Originally Posted by Team Pie 420

... I have some stock AMD CPU coolers that would uberrize cooling if I can separate the HS w/o murdering the fets.

Also, keep in mind that attaching a large/heavy heatsink to the FETs places quite a strain on them physically. I would find some way to secure the heatsink in other ways to relieve the stress...

[Team Pie 420]

Well of coarse,I plan on machining material and using the heat sink as an anchor for the ESC after I pot it.
the HS is going to in essence be the case.

Wont that be an interesting "Non warentee return"?
Only worry is high G loads I brutally subject my land missiles too.
I subject My Rails to hell in a hand basket every drive out.

What kind of thermal cement is on the MMM?
Ill attempt to find a deactivator for it.