Quote:
Originally Posted by Lizard
hmm. Good question, I don't remember changing the wires. But if you say they come with 10AWG I must've changed them obviously :)
Regarding the soldering. Was done with a cheap 60W conrad Iron, I think a 100w one would've been better. In the middle where I joined the cells, there is a piece of copper under the solder blob.
Regarding safety: I put several layers of tape everywhere and bent up those paper insulation thingies so I couldn't short something accidently. Also the lipos were discharged and I did it right next to the open balcony door, just in case :)
|
Thanks! So you added a piece of copper there? I don't have a balcony, but I guess I can throw them out of the window :D.
Quote:
Originally Posted by Arct1k
Make it easier - use the existing wires and just cut them very short.
|
Yeah, you're right, might not make so much difference in Resistance anyway, thing is... I've been telling everyone that 10AWG is for babies :).
Threaded Mode
