Which Lipos For 1920/8 and Micro2095

[Serum]

That's way too high sjcrss, that setup is way too hot imo. those ratings of the motor are under load. you are better of with a higher gearing and a lower kv motor.

[Gustav]

That must be very hot,i've got a 1920/10 and i sometimes run it on 4s in a 1800g truck,albeit geared for 60+mph and that get's a little hot for general driving.It likes 3s,35,000rpm,runs very cool on that.

Did it not get extremely hot at those rpms? testament to lehner that it's still going strong.