RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Brushless

Reply
 
Thread Tools Rate Thread Display Modes
Old
  (#1)
RCcarnut
RC-Monster Carbon Fiber
 
Offline
Posts: 57
Join Date: Feb 2005
Location: New Hampshire
04.12.2005, 07:52 AM

Quote:
Just one question though, seemed like the motor ran a little on the warm side for the gearing, read 125-130 on my temp gauge and the 7 cell pack GP3300s read 160-165.

The motor temps sounds ok. The battery seems way too hot. How are they built? If it is a cheaply built GP stick pack then rebuilding it to side X side with probars should help lower the temps on it.

I used to run a stick pack back when I bought my first brushless(Novak SS) . The battery used to get really hot. I rebuilt it to side x side and it was fine. Now I only use hand made packs.

I run my lehner 5300/9918 in my bandit right now , and with these side x side packs , the battery gets warm only. The motor gets hot though but it stays within a safe range.

Last edited by RCcarnut; 04.12.2005 at 08:34 AM.
   
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com