Center diff for brushless

[glassdoctor]

If you use a low kv motor it's no problem.

It would be tough to properly gear a 3000+kv motor in a truggy with a 44 or 46 tooth gear, unless you are only wanting to do speed runs.

But a 2000kv motor is much better suited to this app imo... not a problem to gear for "normal" or "sane" speeds.

[Rcbros]

squee, So the plastic spur will work with the LSP diff?


Glassdoctor,
I'll be using it for racing and running lipos. I plan and hope to get 30minutes or more run time out of it.