Crazy GorillaMaxx E-Revo

[Sylvester]

No problems, guys, the strobes are back in stock.

[vette1]

I have the Strobe on order and I will probably receive it on Mon. or Tues. However i still like to have a backup, and not only that but what if I design something new and cool. I doubt it but I can still try.

You guys are telling me that the Ofna spur gear will fit the RRS but I don't understand how. As far as I know the screw holes don't line up. If anybody knows how please post photos and info on this thread.

Thank you.

i had to fit a ofna 51 spur to a RRP slipper plate once.

i dont have pics, but i had to press the plate onto the spur with a bench vice (there is an indentationin the spur)very carefully because it is a tight fit. after i just drilled new holes in the spur. it came out perfictly round............

maybe this will help

[vette1]

Awesome, Thanks...:027:

[vette1]

Originally Posted by cemetery gates

i had to fit a ofna 51 spur to a RRP slipper plate once.

i dont have pics, but i had to press the plate onto the spur with a bench vice (there is an indentationin the spur)very carefully because it is a tight fit. after i just drilled new holes in the spur. it came out perfictly round............

maybe this will help

I tried what you said and boy what a project. It works ok but it does wobble a little. Also, I put a flat spot on the motor and I had a problem getting the pinion on. Finally made it on after having multiple problems and not the pinion is a little wobblely also. I have to see if I can get the flat spot more even so it will be perfectly flat. Than maybe I will not have the problem anymore.

I'm getting my strobe slipper parts and Monter GT parts tommorrow in the mail, Mike is sending out the rest of the stuff that I need today so I will not have to worry about the slipper anymore. However does anybody have advice to make the metal shaft that comes out of the motor perfectly flat so that I do not have a wobbleling pinion anymore?