how to keep screws on

[Sylvester]

I think loc-tite would keep them on there, use the blue loc-tite so you can unscrew it later if needed.

[Procharged5.0]

Originally Posted by Sylvester

I think loc-tite would keep them on there, use the blue loc-tite so you can unscrew it later if needed.

This is the best answer to your problem, but MAKE SURE the threads of the set screw and the CVD are clean before you apply loctite, otherwise it will not hold.

[neweuser]

Originally Posted by Procharged5.0

This is the best answer to your problem, but MAKE SURE the threads of the set screw and the CVD are clean before you apply loctite, otherwise it will not hold.

Blue only held for so long for me, I went to red....but yes, clean threads are very important. And never use loctite over loctite, it's useless as Procharged said.