RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > GorillaMaxx

Reply
 
Thread Tools Rating: Thread Rating: 13 votes, 5.00 average. Display Modes
Old
  (#1)
suicideneil
Old Skool
 
suicideneil's Avatar
 
Offline
Posts: 7,494
Join Date: Feb 2007
Location: Devon, England
03.04.2007, 04:30 PM

Well, it did arrive (eventually).... peep this:













And with any luck the FLM towers will be here tomorrow or tuesday.

If you're wandering about the two black boxes- they house two 9v batteries wired in series to power the two 12v 40mm fans which are mounted above & below the esc. I couldnt find any other way of powering them, nor could I find any 5v 40mm fans so that will have to do- I will fab up a mount and attach them over the spare servo mounting slot. I also redid the wiring for the final time- everything cabled tied down onto the chassis and out of harms way. I used the original esc fan to cool the motor by attaching it to the 2 sheatsinks which came with the 30mm fans (broke one- go figure); the rx supplies the juice for that now. Finally, you will notice my lovely modified motor mount- I wanted a single motor mount so I removed it, traced around the gearbox, cut and filed it into shape, then stripped the anodising for good measure; I like it alot. Cheers.

Last edited by suicideneil; 03.04.2007 at 04:42 PM.
   
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com