Which Neu for my CRT?

[riceman]

Thanks for the replies everyone. I kinda figured the 2.5d would be the choice but I know someone running the 2d in their CRT with good results. I posted here mostly to get some other opinions and confirm my own choice.

Aangel - I think I mentioned in my other post that I will be running a Mamba Max. The same combo as in my LST2 - which is running great BTW. I went up 3t on my pinon and the 1515 1Y and Mamba max didn't even blink. Wish I could say the same for my True RC 4S 4400 pack. The eagle tree data from my WOT runs show serious dips below 3V/cell. Pack was hot when I finally decided to check it. The ESC never not over 130F according to the Nomadio temp sensor I have on it. It ran great at the track with my 5S 6000mah Maxamps pack. As for the 1515 vs 1512 - the 1512 should be more than enough torque for a race only CRT.