1:10 or 1:12 scale project wanted...

[BrianG]

The servo is a Hitec 225 and is not a standard size servo. Even though it's small, the 225 has 67 oz-in of torque and 0.11"/sec at 6v. Should be plenty.

I'll get you the dimensions tomorrow if that's ok. I just shut everything down for the night after making about 80% of the motor mount (still have to "machine" out the mesh slots - the part I hate to do). To make it easier to know what measurements you need, could you grab one of the pics above and draw lines showing what you mean? You can either post it here or PM it...

EDIT: Edited to remove inadvertent profanity. :dft001: