1:10 or 1:12 scale project wanted...

[BrianG]

The mount is exactly the height of the CD mounts, and it goes almost to the edge of the chassis (actually, it goes to where the edge starts bending up). The batts are going to go on the other side and the electrics are going to go on top of a custom top plate. Actually, I did notice there is a little flex in the chassis (no more than normal for buggies really), so I think I'm going to make a top plate that hooks to the front and rear diff areas to stiffen it up. This will also give me plenty of room to mount the MM ESC and Spektrum Rx.