Jammin CRT .5 Project

[BrianG]

Nice job! Got any pics of the underside where you had to drill new CD mounting holes? I was thinking of doing this but thought the new holes would be VERY close to the existing holes and was concerned about strength. 1.5mm is not a lot!

[riceman]

Thanks - I didn't drill new holes per se. I actually elongated the existing holes as well as the countersinks. Again. not real pretty but it should hold much the same way engine mounts can be adjusted. The rear mount remains the same so it isn't likely to shift... I hope:002: I'll try to post more pics tonight.

[riceman]

Originally Posted by BrianG

Nice job! Got any pics of the underside where you had to drill new CD mounting holes? I was thinking of doing this but thought the new holes would be VERY close to the existing holes and was concerned about strength. 1.5mm is not a lot!

Here are the pictures of the underside with the diff mounted up.


and a close up



Here it is with the body finally painted up. I kept it pretty simple with a san Diego Padres theme. The one thing I forgot to account for was the stock yellow wing and wheels. I guess I'll have to eventually find a white one to match the scheme.

[Dafni]

Nice one!

I hope Proline comes out with a CP body for this truck!