FLM Hybrids and Flex Tek arms

[GorillaMaxx360]

Originally Posted by chopndroptx

I think between the bulks and the arms, the pin is now the weakest link so it bends easily. I even had to order a bunch of front lower pins from Lunsford just to keep up, but now since I put the brace on I havent even used 1 of the pins.
And just so you know I bash my truck hard, like jumping 1/4 pipes getting air about 7-8 feet high ect....

what brace are you using and exactly what mods did you have to do. Also are the braces used for the back only. Part numbers or links would be good on the brace. thanks

[ssspconcepts]

Originally Posted by GorillaMaxx360

what brace are you using and exactly what mods did you have to do. Also are the braces used for the back only. Part numbers or links would be good on the brace. thanks

My FLM pkg came with two of those suspension braces....hmmm.

[GorillaMaxx360]

Originally Posted by ssspconcepts

My FLM pkg came with two of those suspension braces....hmmm.

i know some came with your bulks but since mine did not come with any do you or chopndroptx know what braces i can use for the arms that will fit that i can buy singly and do you have parts numbers, parts names, and or links

[ssspconcepts]

Originally Posted by GorillaMaxx360

i know some came with your bulks but since mine did not come with any do you or chopndroptx know what braces i can use for the arms that will fit that i can buy singly and do you have parts numbers, parts names, and or links

Try calling or emailing Gina from FastLane Machine. Tell her you want to purchase the suspension arm braces that come with their A-arm kits. Here is her contact info: 636-742-2774 or info@fastlanemachine.com

It usually takes a few days for her to get back to you...but she will call or e-mail back.

Originally Posted by GorillaMaxx360

what brace are you using and exactly what mods did you have to do. Also are the braces used for the back only. Part numbers or links would be good on the brace. thanks

Sorry for the late responce! I didnt get any emails of reply here.

This is the brace I bought:http://cgi.ebay.com/ALUMINUM-REAR-LO...QQcmdZViewItem
It says rear brace but it works on the front!
All I had to do was grind the ends down thin enough to fit the e-clips on and clear the steering bellcrank. You can kind of see in the pictures.