Batch 2 V2 MMM - Page 16 - RC-Monster Forums

MTBikerTim · 12:24 AM

Quote:

Originally Posted by Sammus

You want summer to get here? where in oz are you? I hate running my electrics in our 40C summers, much prefer the 10C of winter - just seems like the cool is nicer on the electronics :P

And I think theres something whacky going on with the post, I'm suddenly receiving a bunch of parcels I was worried about and have been waiting over a month for. If you have express dont you get a tracking number?

You would think so BUT THEY NEVER GAVE IT TO ME. Personally I don't think they have sent it yet or at least didn't send it when they said they did. I have dealt with the retailer multiple times before and I have no doubt I will get the sidewinder it just takes time.

It's freezing here. I'm in the ACT and it's way too cold. Summer isn't a problem for me I love the heat but keeping the electrics cool when the tar they are running on is +50c (122f) is a bit of a challenge. You chew up tires really quick on hot tar too. My main complaint about winter is that it is dark by the time I get home. I have been getting up earlier in the morning so I can take the dog for a walk in the morning when there is some daylight. I also work in an office with no natural light so daylight is precious. Plus riding to and from work in the cold and dark isn't as much fun as it sounds either.

08.11.2008, 10:49 PM

Where abouts did you buy that sidewinder combo from? :)

MTBikerTim · 08.11.2008, 10:55 PM

Quote:

Originally Posted by commando

Where abouts did you buy that sidewinder combo from? :)

I'd rather not mention at least until I get it

. It wasn't from mike though.

George16 · 08.11.2008, 11:21 PM

Quote:

I still haven't received an e-mail saying that my MMMv2 has been shipped.

I'm hoping to receive mine next week since it takes 6-9 days for packages to egt to Japan through the military postal system. I received the email and tracking number yesterday though Joe Ford told me about this last Thursday. CC is also sending some banners we can put up on our home-made track inside the military base.

MTBikerTim · 08.11.2008, 11:52 PM

Quote:

Originally Posted by George16

I'm hoping to receive mine next week since it takes 6-9 days for packages to egt to Japan through the military postal system. I received the email and tracking number yesterday though Joe Ford told me about this last Thursday. CC is also sending some banners we can put up on our home-made track inside the military base.

That's all well and good BUT IT'S OF NO COMFORT TO ME!!! ME ME ME ME ME.

J3110 · 07:40 PM

Oh yeah, baby! Got my incoming delivery from CC email.

edit: oh, I mean, billing info rec'd by UPS email. Still stoaked, though. :D

06:51 AM

Any information when those controllers are available ? Looks like many of rc-monster members have MMM controllers allready in here rc-monster forums...

08.17.2008, 12:39 PM

My v2 is going on hour 7 of use now. It has never got warm enough to get the fan going. 121 esc, motor 150, batteries 105, air temp 93 are the hottest i have seen. converted revo, 17/38 pinion/spur, wide ratio tranny.

RBMike · 08.17.2008, 08:04 PM

I put an hour of total track time on my v2 today with 5S in a buggy & it ran perfect but the fan did stop (I think). I have not checked it out yet.

DRIFT_BUGGY · 08.17.2008, 08:07 PM

Anyone know how many V1's are still out there?

08.17.2008, 08:22 PM

Quote:

Originally Posted by DRIFT_BUGGY

Anyone know how many V1's are still out there?

My buddy runs one in his e-maxx and has since I had mine that failed.

blueb8llz · 08.18.2008, 01:31 AM

Quote:

Originally Posted by DRIFT_BUGGY

Anyone know how many V1's are still out there?

im still using a v1 on 4s

lincpimp · 08.18.2008, 02:18 AM

My V1 has a few hours on it with 4s lipo and a 1515 1.5d, and no issues so far.

I did clearance the bottom of the case so that the fan plug did not rest on it. I also enlarged the opening that the signal and switch wires exit thru. And I added some high density foam underneath the main pcb to support it. That way the board could not knock against the bottom cover during a hard landing. My fan still works too.

e-mike · 08.18.2008, 06:22 AM

Quote:

Originally Posted by lincpimp

I did clearance the bottom of the case so that the fan plug did not rest on it. I also enlarged the opening that the signal and switch wires exit thru. And I added some high density foam underneath the main pcb to support it. That way the board could not knock against the bottom cover during a hard landing. My fan still works too.

i did that on both of my v1 and still going stong

brushlessboy16 · 08.18.2008, 09:56 AM

Quote:

Originally Posted by lincpimp

My V1 has a few hours on it with 4s lipo and a 1515 1.5d, and no issues so far.

I did clearance the bottom of the case so that the fan plug did not rest on it. I also enlarged the opening that the signal and switch wires exit thru. And I added some high density foam underneath the main pcb to support it. That way the board could not knock against the bottom cover during a hard landing. My fan still works too.

does that void your warranty?

and has this problem been fixed on the v2's?