New Project - Page 2 - RC-Monster Forums

Arct1k · 12.02.2008, 01:46 PM

John I have some maxx shocks with internal soft and medium springs to try a droop setup...

I have the BEC for upping the voltage to 6.2v

Not sure about the links yet - these might do the job

http://rc4wdstore.com/product_info.p...roducts_id=334

Any assume I need something to attach the shocks better than a zip tie! Is this the best way to do it?

http://rc4wdstore.com/product_info.p...roducts_id=295

Arct1k · 12.02.2008, 01:55 PM

Brian - you are the king on painting chasus what do you think will work best - I'm thinking of a gun metal or silver with blue lexan panels.

johnrobholmes · 12.02.2008, 01:56 PM

Outrunners and hard crawling don't really mix well. They cog a ton when a wheel gets stuck, and with large tires it makes it worse. Sensorless is much better suited for a scaler.

Those links and shock mounts would work if you don't want to fab anything. FYI the 3mm threaded ballends will break pretty easy on a clod.

Arct1k · 12.02.2008, 02:02 PM

Thanks for the tips - I'll hold off buying anything until I get it and strip it down - Pics to come...

Arct1k · 12.14.2008, 10:20 PM

Making some progress...

TDC57 · 12.15.2008, 10:16 PM

Quote:

Originally Posted by Arct1k

Making some progress...

WOW that looks GREAT!!!

Nice job...

TexasSP · 12.14.2008, 11:42 PM

Looks a dang sight better already. I like silver/gray and blue together.

BrianG · 12.14.2008, 11:46 PM

Wow, pretty!

Is that made of aluminum or steel tubing? Just curious because I noticed the welds and if aluminum, was wondering how you welded it. I'm looking for a low-cost welding solution for one-off jobs but don't want to spend a ton of cash on a TIG or MIG (can't remember which does al welds).

What's_nitro? · 12.15.2008, 04:45 AM

Quote:

Originally Posted by BrianG

I'm looking for a low-cost welding solution for one-off jobs but don't want to spend a ton of cash on a TIG or MIG (can't remember which does al welds).

TIG.

lincpimp · 12.15.2008, 10:35 AM

You can do AL with a wire feed mig, but I am not sure if the smaller 120v models will do it. I have a larger Miller Mig (actually have 2 of them) and they have been very good machines. We mainly weld sheet metal (car body panels) but I recently was welding 3"-4" galvanized pipe for my low front fence and swing gates, and that stuff is thick. A good welder is a great investment, that is for sure!

TexasSP · 12.14.2008, 11:48 PM

BrianG, miller makes some nice welders for around 3-400 for home type setups. I have seen them in person and the work really well. The are not for industrial use for hours on end, but for the home user they are great.

BrianG · 12.15.2008, 11:12 AM

Yeah, I had started a thread about welding aluminum a while back and know my options are to A) Get a good TIG welder and learn how to use it, B) Use that solder type stuff (links in that thread) and deal with the not-so-strong results, or C) find someone local to do the one-off jobs I need to do. I was just hoping there was some new magical/easy/cheap process.

lincpimp · 12.15.2008, 12:07 PM

Quote:

Originally Posted by BrianG

Yeah, I had started a thread about welding aluminum a while back and know my options are to A) Get a good TIG welder and learn how to use it, B) Use that solder type stuff (links in that thread) and deal with the not-so-strong results, or C) find someone local to do the one-off jobs I need to do. I was just hoping there was some new magical/easy/cheap process.

I heard that if you close your eyes really tight and tap your heels together a few times while wishing really hard... Nothing happens.

The local welder will be the cheapest... But having a tig welder would be nice!

Luckily a buddy of mine has welded al since he was 10 so I am covered!