help!

[Steelerfan]

i moved the controller and seemed to help some. i'll move a little more until i get it right. thanks

[Sylvester]

That looks better, now go get and get her dirty:)

[BrianG]

I noticed you are using the stock AM receiver. AM by nature is very sensitive to noise and those high current wires can radiate quite a bit of noise. I see that the receiver and antenna is right near the BL motor, wires, and ESC. Moving the receiver might be easier than moving the ESC if you still have problems - maybe on top of the battery pack?

[squeeforever]

i would mount it on the front shocktower, facing the rear of the truck. you have plenty of antenna wire so it should be ok.

[Steelerfan]

I've moved and/or replaced all electronics. The problem is getting worse. I think the esc may be the problem. I emailed mike for suggestions.

[Steelerfan]

I can't seem to get an e-mail to Mike. Any suggestions?

[Sylvester]

rcmonstermike@gmail.com < try this email it should work now.

[Steelerfan]

thanks