Hot bodies 1/8 diffs - Page 23 - RC-Monster Forums

cmac · 10.31.2011, 11:07 PM

Does anyone have any experience with this housing? Will it work with my stock Brushless emaxx transmission gears?
http://www.ebay.com/itm/RDLogics-E-M...item45eb8a86fc

JERRY2KONE · **Yes -** 11.01.2011, 02:00 AM

Yes that is a 3905 tranny case, which is the newer version of the EMaxx. It looks like a nice alternative for the stock plastic tranny case.

suicideneil · 11.01.2011, 10:59 AM

Seen a couple guys using those- no complaints & it does look rather nice- acts like a giant heatsink for the motor too which is... cool

cmac · 11.01.2011, 10:14 PM

So I think I might have told you guys that I bought UE diff cases and UE spider six gears around Sept. I had some time to pull the diff cases apart and to my surprise.... diff's are definitely not UE spider six diffs or Ofna six diff's. Man I'm pissed!!!!! I'm passed the 45 day mark so my chances for resolution
is slim to none. I was able to talk to an Ebay rep and was able to open a case on him so I hope something can be done. I can't believe that this has happened to me. Oh well you live and you learn.

suicideneil · 11.02.2011, 01:19 PM

Got a picture?

Doubt you'll get much luck unless the guy you bought them from was misinformed as to what he had purchased originally and decides to help you out, otherwise there is nothing you can do to get your money back via paypal past the 45 day mark. That's why you have to check these things over as soon as you get them rather than tossing them to one side for a couple months before getting round to using them...

cmac · 11.02.2011, 01:46 PM

I know that now. I did not even know about the 45 day mark before this. I do now,& this will be never happen to me again!!!

JERRY2KONE · 08:44 AM

When you play long enough in this hobby all of us gets burned at one time or another. Unfortunately we all have to learn through experiences created on Ebay, craigs list, or even on these forums sometimes. Chalk it up to just that, a learning experience and remember this guy and share who it was on whatever forums you visit on a regular basis to help keep the rest of us from suffering the same fait. Such is life.

cmac · 04:04 AM

Jerry I'm going to take the high road on this. You or any member feel free to PM me, and I will give you his name.

JERRY2KONE · **Please -** 11.03.2011, 08:51 AM

Please understand I am not poking fun at you. Your trying to take an ethical tact with this, when the guy has already been unethical with the way he dealt with you. If someone suckers me with a bad deal for whatever the reason I give them one chance to rethink their position and fix the problem. If the matter does not get resolved to your satisfaction or he does not at the very least live up to the advertised item, then it is time to bring them out into the open and warn everyone else about dealing with this guy. Its guys like this who helped us create the word ethical, because of their shameful attitude. Don't let him off the hook because you want to be a nice guy. He took your money and is laughing in your face, because he got away with a dirty deal.

cmac · 11.03.2011, 10:11 AM

His name is supersport657 out of AB Canada.

cmac · 11.03.2011, 10:18 AM

So I see the Ofna Spider six diff's on Amain hobbies web site. Can someone give me a link to the 13t pinion gear please?

WEB · 11:12 AM

Look at the ofna Hyper 7 parts and they should be one on page number 2 it does not say it is 13 teeth but it is you can look up part number to see if it is 13 teeth:)
WEB

MiRatlhed · 11.04.2011, 11:27 AM

Here is the link to the UE Instruction manual for the 6 Spyder diffs. This has the Ofna part numbers listed on the parts list.

http://www.unlimitedengineering.com/...ctions-WEB.pdf

cmac · 11.04.2011, 03:54 PM

Quote:

Originally Posted by MiRatlhed

Here is the link to the UE Instruction manual for the 6 Spyder diffs. This has the Ofna part numbers listed on the parts list.

http://www.unlimitedengineering.com/...ctions-WEB.pdf

Thanks for so much for the link.

cmac · 11:57 AM

OK. I got the Hitec 7955 servos, and got them installed. The steering is much better, but still under hard acceleration it pulls hard to the left. It is a good amount of torque steer. I noticed when I pulled my UE diff cases apart it says nitro on one side and electric on the other. I assume that you place the ring gear on the electric/nitro side depending on what drives your truck. Could the side that the ring gear is on contribute to the torque steer? If I switch the ring gears to the other side wouldn't it just pull to the opposite side? I have 300,000 wt diff oil in the Slipper 7,000 wt. in the front diff, and 5,000 wt. in the rear diff. Should I go even heavier in the center diff?