RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Brushless

Reply
 
Thread Tools Rate Thread Display Modes
Old
  (#31)
Bmr4life
RC-Monster Carbon Fiber
 
Offline
Posts: 453
Join Date: Mar 2006
06.19.2006, 04:47 PM

Quote:
Originally Posted by cart213
Over 50 mph is impressive on 2s, if that's how fast you're actually going. Like metalman said, though, 3s will be a stretch to hit 75 mph like you want to. The faster you go, the harder it is to go even faster. I think you'll need 4s (at least) to reach over 75.
I agree. Hitting 50mph on 2s provides a 100% gaurantee to not hit 75mph on 3s. Increasing voltage by 50% would only increase speed by 50% in an ideal world.
   
Reply With Quote
Old
  (#32)
squeeforever
RC-Monster Mod
 
squeeforever's Avatar
 
Offline
Posts: 6,254
Join Date: May 2005
Location: Baton Rouge
06.19.2006, 04:49 PM

Yup, wind resistance, more weight, ect. are all factors that would have to be figured in.
  Send a message via AIM to squeeforever  
Reply With Quote
Old
  (#33)
sleepy23
RC-Monster Carbon Fiber
 
sleepy23's Avatar
 
Offline
Posts: 126
Join Date: Apr 2005
06.19.2006, 06:04 PM

Quote:
Originally Posted by Bmr4life
hey OP, have you GPS'd your ride to verify the 50mph top speed on just 7.4v? If so, how much runway does it require? thanks
i assume you mean me sinc e i dont see anyone with that screen name.
i have gps'd mine with a garmin etrax (the yellow one) and reached 50mph with the 2s (7.4v) and did it in less than 200 feet. i dont know the exact distance, but one day i am gona chalk off the road and see, or i might wait until the parking lot is paved for the new walmart below my house and go down there and run.


S^3: everyone wishes they could design modifications like these.
   
Reply With Quote
Old
  (#34)
Bmr4life
RC-Monster Carbon Fiber
 
Offline
Posts: 453
Join Date: Mar 2006
06.19.2006, 06:18 PM

Quote:
Originally Posted by sleepy23
i assume you mean me sinc e i dont see anyone with that screen name.
i have gps'd mine with a garmin etrax (the yellow one) and reached 50mph with the 2s (7.4v) and did it in less than 200 feet. i dont know the exact distance, but one day i am gona chalk off the road and see, or i might wait until the parking lot is paved for the new walmart below my house and go down there and run.
yeah, OP = Original Poster. Thats cool that you hit 50mph on only 7.4v. I've been runing 8.4v (7 GP3300) on an 8s motor and could only hit 41mph (same GPS unit you have) but I'm seroiusly limited by area and radio interference. I've got about 100ft of straight road in my apartment complex but my radio range is only 50-60ft. I need to stop being lazy and switch the cheap traxxas tx and rx out and install a JR setup I have stored somewhere.
   
Reply With Quote
Old
  (#35)
SpEEdyBL
"Out of spec" enthusiast
 
SpEEdyBL's Avatar
 
Offline
Posts: 820
Join Date: May 2005
06.19.2006, 07:40 PM

Actually, 65 mph is possible w/ 3s lipo. Here are some 60+ mph rustlers:

http://www.swami-rc.com/speedrecord.htm

As you can see one, of the rustlers did 66.6 mph only on 10 cells with the lehner basic 5300.


Check out my custom converted 8ight:
Sub 7lb, lowest CG of any 1/8 buggy

http://www.rc-monster.com/forum/show...894#post367894

Area 52 Ranch Raceway
T.R.C.R.
   
Reply With Quote
Old
  (#36)
sleepy23
RC-Monster Carbon Fiber
 
sleepy23's Avatar
 
Offline
Posts: 126
Join Date: Apr 2005
06.19.2006, 10:40 PM

well quite honestly, i should be able to easily throw down 60mph when compared to a rustler. my truck is highly modified and just for street racing. its still a work in progress, but i refuse to believe that i couldnt smoke any rustler out there, of course i would prolly have to upgrade motor/esc to match, but there are very few trucks out there that are as mechanically moddified as mine.
so i will let the gps speak for me.
again, any word on the mamba max?


S^3: everyone wishes they could design modifications like these.
   
Reply With Quote
Old
  (#37)
cart213
RC-Monster Carbon Fiber
 
cart213's Avatar
 
Offline
Posts: 484
Join Date: Dec 2005
06.20.2006, 12:24 AM

Quote:
Originally Posted by SpEEdyBL
Actually, 65 mph is possible w/ 3s lipo. Here are some 60+ mph rustlers:

http://www.swami-rc.com/speedrecord.htm

As you can see one, of the rustlers did 66.6 mph only on 10 cells with the lehner basic 5300.
True, but I was referring to his original goal of at least 75 mph. ;)
   
Reply With Quote
Old
  (#38)
sleepy23
RC-Monster Carbon Fiber
 
sleepy23's Avatar
 
Offline
Posts: 126
Join Date: Apr 2005
06.30.2006, 12:29 PM

i went ahead and ordered the cc7700. i cant wait until it gets here and i can run it.


S^3: everyone wishes they could design modifications like these.
   
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com