So how will you be using your mamba monster?

[rschoi_75]

XT8 on 5s

[bruce750i]

6S MMM Micro RS4

[VintageMA]

2 projects in mind:

Lighten my XB8EC with 6S and a 1512/3.5d (1500kv) an a TP2600 6S pack - going to try and get longer runtime through high efficiency and low buggy weight - hoping to get below 8lbs with this setup.

E-Revo when it comes out 6S 3900xp Neu with a 1515 motor - jeeze how many of these are we going to see - this'll be the weekend project of the summer.

[rcmonkey]

In my Xray XB8 TQ with 6S1P A123, don't know what motor yet, possibly an outrunner.

[tc3_racer_001]

if i can get one... hyper 8.5 PRO i got yesterday... still undecided on the motor, batteries (will 6s1p have enough amp draw capability to handle high powered neu motors. more than 8 cells is outa the question (total) so im thinking 4s2p.. i just want something reliable, not something balistic!

[sleebus.jones]

Originally Posted by tc3_racer_001

more than 8 cells is outa the question (total) so im thinking 4s2p.. i just want something reliable, not something balistic!

Just pick a motor to run at a reasonable speed with 6S. It'll be more efficient and run cooler. You can still keep the speed under control. If you pick a motor with a similar RPM to a nitro, you can run the same kind of pinions and keep the speed the same.

Besides, 6S1P fits so nice in a buggy. :)

[tc3_racer_001]

ok, but seriously, will 6s provide the amps required for these powerful motors? and what motor would you suggest? ive got an rc monster heatsink, so smooth can may be better?
thanks,
ryan

[DRIFT_BUGGY]

Losi 8ight on 5S

Going in a Revo with Neu 1515 1y and 5s.

Mines going in a 3905 E 6s A123/Neu 1512/2.5d, gearing for mid 40's.

[lincpimp]

I may have to pick up another one to replace the quark125b in my hyper8. That will also allow me to remove the ccbec and some extra wiring. Trying to lighten the buggy as much as possible.

[JThiessen]

I'm going to be the odd man out here:
Revo, Fiego 10L, and 12 cells of pure NiCd 3300maH lightening!!!!

[ilpufxit]

6s running an Align 600XL hybrid outrunner.

[nl12]

I would like to buy a MMM but I dont have a truck to put it in, I would run 6s 30c neu lipos, if I can find a truck I like then I will buy one. I wish there was an Xray 808 truggy........

[mabu]

I gonna replace my damaged Monster Pro in my Revo ... hope to get the MMM asap