 |
|
|
|
 |
|
|
 |
8mm revo drive shaft coupler |
 |
|
 |
|
(#1)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 127
Join Date: Sep 2005
Location: philly
|
8mm revo drive shaft coupler -
05.24.2010, 07:20 AM
what is the difference between the v2 and v3 edition revo aluminum driveshaft couplers that rc-m sells? i need the 8mm ones but they have been out of stock for awhile. is the v3 8mm also
any help would be appreciated thanks |
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#3)
|
|
RC-Monster Titanium
Offline
Posts: 1,884
Join Date: Jul 2009
|
05.24.2010, 06:16 PM
Yes, the V3 is 6mm bore.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#4)
|
|
Site Owner
Offline
Posts: 4,915
Join Date: Nov 2004
Location: PA
|
05.24.2010, 11:04 PM
The V3 pinion is 8mm turned down to 5mm bore, actually. The couplers are opposite to match of course(8mm partially through and 5mm partially through). the set screw location is different as well. I drill and ream the original V3 version couplers to 8mm all the way through, then drill and tap another set screw hole for the 8mm version(bit of a PITA).
|
|
|
|
|
|
|
|
|
|
|
|
|
(#5)
|
|
RC-Monster Dual Brushless
Offline
Posts: 3,794
Join Date: May 2005
Location: georgia
|
05.27.2010, 08:52 PM
Thought the V1's were the 5mm ones, figured the later versions were to allow the full sized shaft to work
People here hate Nitro, I love it. I start it, run it about 50 ft from me and it dies, I go after it. Perfect exercise |
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
Hybrid Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
