Cheap "high voltage" esc Quest

[TruckBasher]

Hmmm that looks the same as the one being sold on EBAY.....too bad for the price program module was not included...or did I misread it?

[lutach]

Originally Posted by TruckBasher

Hmmm that looks the same as the one being sold on EBAY.....too bad for the price program module was not included...or did I misread it?

It is the exact same one. I still can't believe they are being sold for $100 withou the program box. If I started bringing this in, I would just sell it for $100 with the program box. Plus I would have full report with video and data to show how well it does with different motors, plus charge a very low s/h.

[timaneli]

Originally Posted by lutach

It is the exact same one. I still can't believe they are being sold for $100 withou the program box. If I started bringing this in, I would just sell it for $100 with the program box. Plus I would have full report with video and data to show how well it does with different motors, plus charge a very low s/h.

do you have this report with video´s on any webpage there i can see?
what other motors have you try on this esc and wich voltage or lipo´s do have use on them?

i am asking that because i have bought this 1:10 brushless combo that i wanto to run with 4s lipo´s!!

link of the kit:
http://cgi.ebay.co.uk/1-10-Brushless...1.c0.m14.l1308

[lutach]

Originally Posted by timaneli

do you have this report with video´s on any webpage there i can see?
what other motors have you try on this esc and wich voltage or lipo´s do have use on them?

i am asking that because i have bought this 1:10 brushless combo that i wanto to run with 4s lipo´s!!

link of the kit:
http://cgi.ebay.co.uk/1-10-Brushless...1.c0.m14.l1308

I don't have one yet. I said "If I started bringing them in". I spoke with the manufacturer and they are supposed to be sending me a 6S and a 10S model for testing.

[timaneli]

Originally Posted by lutach

I don't have one yet. I said "If I started bringing them in". I spoke with the manufacturer and they are supposed to be sending me a 6S and a 10S model for testing.

the modellfun store sell my my combo and tell me for use a 4s lipo on this motor i need a external bec.

what do you advise at external bec´s??

i am from portugal and i only buy on ebay until now..

regards

[snellemin]

I am only able to run low kv motors on mine. It handles 4s A123 well. I had to swap out 2 fets and replace the caps on mine, after I blew it running with a different motor. It has worked ever since though.

[Metallover]

Jeez, I looked at this thread and there is a.... spanish? conversation going on? I haven't read any more then the last couple pages of this thread and I though I should post if this hasent already been said:

http://www.hobby****city.com/hobbyci...idProduct=7341 take out the stars

It is an 100a esc that handles up to 8s lipo. It only costs 30 dollars too. I made a thread on it...

The company is called suppo and they make a 12s 200a controller... I don't know how you can get it. I think you can contact lightflightrc and they can hook you up.

[lutach]

Originally Posted by Metallover

Jeez, I looked at this thread and there is a.... spanish? conversation going on? I haven't read any more then the last couple pages of this thread and I though I should post if this hasent already been said:

http://www.hobby****city.com/hobbyci...idProduct=7341 take out the stars

It is an 100a esc that handles up to 8s lipo. It only costs 30 dollars too. I made a thread on it...

The company is called suppo and they make a 12s 200a controller... I don't know how you can get it. I think you can contact lightflightrc and they can hook you up.

It's Portuguese not Spanish. You can't get the 200A as I wanted to get one with a car software, but Suppo used sample boards that couldn't take the amp draw. Nobody will sell the 200A if it can't be built. I had to buy the MOSFETs and send them to Suppo.

[Metallover]

I could have sworn lightflightrc had one. I was trying to get the 125a I think and they said they had a 200a. I never knew the boards couldn't take the draw.

Sorry about the language messup. I don't know either language.

[lutach]

Originally Posted by Metallover

I could have sworn lightflightrc had one. I was trying to get the 125a I think and they said they had a 200a. I never knew the boards couldn't take the draw.

Sorry about the language messup. I don't know either language.

They don't. If they do and if you get one, they'll have my MOSFETs on them, but it's cool I got the NXP PHB160NQ08T for $0.45 and had Suppo pay $1.25 for all 800 pieces.

[suicideneil]

You total rip-off merchant...

[suicideneil]

Yet more contenders, from Bidproduct this time:

http://www.bidproduct.com/part/Produ...ESC%20_28.html

http://www.bidproduct.com/part/Produ...ESC%20_31.html

They both have proportional brakes (more or less) and reverse- requires the optional programming boxes ideally.

[lutach]

Originally Posted by suicideneil

Yet more contenders, from Bidproduct this time:

http://www.bidproduct.com/part/Produ...ESC%20_28.html

http://www.bidproduct.com/part/Produ...ESC%20_31.html

They both have proportional brakes (more or less) and reverse- requires the optional programming boxes ideally.

Those act more like airplane esc. I have the Etti boat esc and they are just like the airplane esc, but they work with pistol radio.

[suicideneil]

Bah, humbug. Would they be anygood as a cheap-ish option? I've had a few people ask me about them but I have no clue really.

[Metallover]

I think the Hobby City "Super Simple" (suppo) 100a one is the way to go. Only 30 dollars.