Mamba Monster dead?

[johnrobholmes]

Mine worked well today, I put it in a crawler so the BEC got a good workout.

[Robert]

We're not off to a good start. :( I'm glad I held off on the beta's

Originally Posted by Robert

We're not off to a good start. :( I'm glad I held off on the beta's

well i would have but i smoked my mm a few days after the presale started so i was like well what else am i gonna do. Im sure cc will do everything in there powers to make sure everyone that has a bad mmm get a replacement asap.

[Robert]

Originally Posted by dubkatz

Im sure cc will do everything in there powers to make sure everyone that has a bad mmm get a replacement asap.

I agree with you. It's just a temporary set back. They're good guys.

[Just go Play]

Hey Dicky have you considered consulting a voodoo priestess about getting rid of the dark cloud over your ESC's?

Sadly yesterday my MGM let out a puff of smoke that david copperfield could have made a 747 materialize from. Since I had planned on waiting for castle to release the motor combos and all the pre-sales are sold out I'm likely now looking at 6 weeks until I can get a new controller. At least you should be able to get yours repaired or replaced sooner then that.

that also sucks play, i like the dark cloud comment he he

[Just go Play]

Well on the upside I decided to try ordering a MM from Mike again (after getting the out of stock notice yesterday) and was able to place an order and use the 2nd discount code! So maybe now I'll only be down for 4 weeks or less if I'm lucky.

I tell ya if I had the kind of luck that Dicky has had lately I'd have to tell the old lady I was going back to custom motorcycles so I could save some $$$.

[JeffEmbracedDC]

Originally Posted by Just go Play

Well on the upside I decided to try ordering a MM from Mike again (after getting the out of stock notice yesterday) and was able to place an order and use the 2nd discount code! So maybe now I'll only be down for 4 weeks or less if I'm lucky.

I tell ya if I had the kind of luck that Dicky has had lately I'd have to tell the old lady I was going back to custom motorcycles so I could save some $$$.

2nd discount code? :) I thought I missed out!

[tc3_racer_001]

mambamonster2

[Sparky]

I will let you know the two minutes the Monster ran it was incredibly smooth. I have been running the MGM controller and it made the MGM look like a piece of junk. The MGM runs so rough; however my MGM has been running strong for 5 months now. I really think it was the 6s on the BEC. I had been setting up the steering servos. The braking was really good also. It makes a funny noise during the braking.
Has anyone else out there been running it on 4s or 5s with out any problems?

[kulangflow]

Originally Posted by Sparky

Has anyone else out there been running it on 4s or 5s with out any problems?

Mine is running great on 5s lipo and 6s2p a123. No problems so far. (Knocking on wood)

Been running mine with a Neu 1527 on 6S with no problems yet. And this is on a heavy Savage with a 5955 333-oz steering servo and a 645 braking servo. So far the BEC is holding up. Fingers crossed!

[DRIFT_BUGGY]

Originally Posted by Electric Eel

Been running mine with a Neu 1527 on 6S with no problems yet. And this is on a heavy Savage with a 5955 333-oz steering servo and a 645 braking servo. So far the BEC is holding up. Fingers crossed!

Thats good news, hope it stays like that

Yes, please let's hear from those who have NOT had problems. This controller is my only hope of durability...............

[RBMike]

Originally Posted by kulangflow

Mine is running great on 5s lipo and 6s2p a123. No problems so far. (Knocking on wood)

Sorry for the off topic but could you please tell me your whole set-up & run time? car,Motor,gearing. I just finished an MBX5 conversion & am using A123-6s. Plan on testing later tonight.