| flm maxx chassis brace | carbon fiber | ofna cd | hacker c50 10xl |

[ANGRY-ALIEN]

After many moons of researching, designing, tweaking (still tweaking actually) and waiting, I finally got the chance to start this project of mine.

A list of ingredients:

electrics/power

Hacker C50 10XL
Quark 125B with 'custom' heatsink/mount
Dimension Engineering Sport BEC
Li-saver (Mike's version)
Airtronics steering servo (94359)
Airtronics 3ch Receiver FHSS 2.4 GHz MX-3

chassis

Custom carbon fiber upper and lower plates
FLM Aluminum bulkheads
FLM Aluminum chassis brace
Hardcore Titanium skid plates (front and back)
Unlimited Engineering monoblock chassis extension

suspension

Pro-line steering/servo saver
Pro-line suspension arms
pro-line 23mm Velocity wheels with Bow-Ties and Badlands
Unlimited Engineering shock towers
Unlimited Engineering Supermaxx shocks X 4 (blue springs in front and blacks in the rear)
40 Series USE Hot Racing hubs (23mm extension nuts)
Aluminum knuckles

drive train

OFNA modified LX one center diff with carbon fiber mounts (OFNA Spider on the way)
Unlimited Engineering diff ultralite 7.5 housing
Unlimited Engineering drive cups
Hot Bodies Lightning Hardened Differential and Pinion
HPI Savage XL center drive shafts/dogbones
MIP CVDs all around
Pro-line 23mm hex hubs
RC-Monster pinions 14, 16 and 18 (for speed runs maybe)

Okay... have a look see...

The test cuts made from PVC












Carbon cuts... they were/are a bit rough due to the operator not setting up the router to cut through the material slowly (might have been a dull bit too)...
so it ended up with with a whole bunch of burs along the edges. The best things is, he did it for free... so I will work with it for now.











More to come...