What Neu Motor for CRT?

[Arct1k]

2.5 on 5s/6s would be better - If you want a vote - Monster Mike runs a 2.5D in his truggy

Originally Posted by Arct1k

2.5 on 5s/6s would be better - If you want a vote - Monster Mike runs a 2.5D in his truggy

Ok.

I just found out that the Lipo/Charger and stuff is REALLY expensive. I also need a Radio/Receiver.

I might get really nice 7-Cells for now.

[Arct1k]

The proteck 5s 4000 are 83 at amain - You get $5 off and free shipping if you round that up to $100

On the rx/tx - you should look at 2.4ghz - Dx3R is really nice but you can get the losi 2.4 on ebay for 80

Hmm...

That will work.

What charger? Is there a good one under $100?

Originally Posted by DiFabio42

Hmm...

That will work.

What charger? Is there a good one under $100?

I would suggest Hyperion, its the only charger I have owned and have never had a problem with any of them, for under $100 this will do fine and you will need a PS or lead acid car battery, for a little more they have a ac/dc model but its output is only 50 watts

http://www.b-p-p.com/proddetail.php?prod=fa_0606i_DC

Originally Posted by azjc

I would suggest Hyperion, its the only charger I have owned and have never had a problem with any of them, for under $100 this will do fine and you will need a PS or lead acid car battery, for a little more they have a ac/dc model but its output is only 50 watts

http://www.b-p-p.com/proddetail.php?prod=fa_0606i_DC

I was going to get...

http://www.impaktrc.com/product_info...oducts_id=2057

Or is the one you showed me better?

Also, How much can I sell a Dynamite Twin Peak Charger for? Used slightly.

[Arct1k]

Thats what I have (along with 2 5i's) it is just 5% cheaper and free shipping from b-p-p.com

Originally Posted by Arct1k

Thats what I have (along with 2 5i's) it is just 5% cheaper and free shipping from b-p-p.com

Sweet. TrueRC 6s 8000mAh Lipo is $210.00. Nice deal. I'm getting that battery.

Originally Posted by DiFabio42

Sweet. TrueRC 6s 8000mAh Lipo is $210.00. Nice deal. I'm getting that battery.

just a heads up the 6s 8000 is a very big battery I have a 6s 5000 and I was surprised how big it was when I got it, and the charger you have a link to is the ac/dc battery I was suggesting but I didnt since you wanted to keep the price below $100, and its out put is only 50 watts...you would need about 200 watts to charge the 6s 8000 in an hour so you would be looking at 4hrs to charge that pack

Originally Posted by azjc

just a heads up the 6s 8000 is a very big battery I have a 6s 5000 and I was surprised how big it was when I got it, and the charger you have a link to is the ac/dc battery I was suggesting but I didnt since you wanted to keep the price below $100, and its out put is only 50 watts...you would need about 200 watts to charge the 6s 8000 in an hour so you would be looking at 4hrs to charge that pack

Oh...

What's a 200 watt charger?

http://www.impaktrc.com/product_info...oducts_id=2058

That's 250 Watts.

What power supply can I use with that?

Originally Posted by DiFabio42

http://www.impaktrc.com/product_info...oducts_id=2058

That's 250 Watts.

What power supply can I use with that?

I have that charger and its great, you were sayinh=g you wanted to keep the price down or that would have been my first choice to suggest, I run the ofna 14v 18 amp PS and its good here is a link


http://www.impaktrc.com/product_info...oducts_id=2428

just make sure the PS is a switching type the power is clean without spikes and you will be fine

that PS puts out 252 watts and you will need to factor in 20% for effiency and that takes you down to 200 watts ...so thats is the smallest PS I would go with if you want to charge the 6s 8000 pack, but when you run higher voltage you dont need such a big pack escpecially when you run a lower kv motor

Ok. I am going to get the 6s1p 5000mAh Lipo. Will I still need that $100 Supply? Is there anyother CHEAPER one?

http://www.impaktrc.com/product_info...oducts_id=2418

Like that one?

I would expect to pay $100 for a decent PS, you could make one from a computer PS but you would need to make from a 600w supply, I believe there are cheaper PS for the hobby out there....when I charge my pack I am using about 135 watts...but dont try to get a PS that is just barely poerful enough I like to put together a set up where I allow my self some leeway

Originally Posted by azjc

I would expect to pay $100 for a decent PS, you could make one from a computer PS but you would need to make from a 600w supply, I believe there are cheaper PS for the hobby out there....when I charge my pack I am using about 135 watts...but dont try to get a PS that is just barely poerful enough I like to put together a set up where I allow my self some leeway

So, http://www.impaktrc.com/product_info...oducts_id=2418 that power supply is powerful enough? Because that Charger is 10A and the Power Supply is 10A.