Looking for a muggy roller...

[BL_RV0]

I'd probably use a big outrunner or dual KB45's, or 1 HV KB45.

[lincpimp]

Originally Posted by BL_RV0

I'd probably use a big outrunner or dual KB45's, or 1 HV KB45.

Going hv with a kb45 sounds good. I have 2 xl kb45s and have been wondering what to use them in... I will say that the L can motors can draw some juice, but seem to stay reasonably cool in my gtp. I am sure 1 with 8-10s lipo would be plenty to move a heavy 6x6 truck!

[BL_RV0]

Originally Posted by lincpimp

Going hv with a kb45 sounds good. I have 2 xl kb45s and have been wondering what to use them in... I will say that the L can motors can draw some juice, but seem to stay reasonably cool in my gtp. I am sure 1 with 8-10s lipo would be plenty to move a heavy 6x6 truck!

I'm assuming it'll be ~20-22lb because it'll have rockets and such on it. You think the KB45 on 10s will handle it? I'll probably use this one:
http://www.hobbycity.com/hobbycity/s...idProduct=5158
With lutach's 10s ESC... On 10s... (duh) and gear for high 30's. Me and TDC57 will have some fun killing each other at November or December's SoCal bash!

[lincpimp]

Should run cool at 25k rpm max, and will have tons of torque.