g2r motor/controller

[tallyram]

thanks stampy. from the posts here, can you mak a suggestion on the motor/controller?

[tallyram]

i see the prices for the 30 and 40, what about the 50, and do you think the 50 would be in order to really stomp nitro? what brand, cell count, capacity, and style (parallel or series) lipo would you guys suggest? also where can i buy the lipos you suggest?

[stampy]

im shur mike can get a 50 for you but you might not need that much torque. the best lipos on the market right now are prolly the flight power evo20's and you can get them here www.duralitebatteries.com. id go with 2 3s 3700's packs and wire them in series for 6s 3700's hope that makes sence :027:

Mike can get you anything you need to upgrade your truck. he doesnt have everything on his site but you can just email or pm him if you need anything. you would probably need a 1940 or 1950.

[tallyram]

sorry to beat a dead horse, but i'm ready to buy some of the items for the g2r build. the track i'll be racing on is big with 5ft tall triples. only the hellfires and lightnings can clear the triples. i need to know which lehner motor this project requires. i need enough power to clear the big jumps and still be able to control it when i hit the throttle. also advice on a controller would be nice. most say lehner 1940 or 1950 with a 9920. i just want to be sure i have enough power to clear the jumps because most of the nitro revos can't clear it and they are never in contention for a win. thanx again!!!!

im suspecting that you are going to use 6s lipos and if i was you i would go with a 1950 8 turn.

how long are your races going to be

[tallyram]

i'm not sure about the race length or which size lipos to use. your positive that the 1950 will keep up with the lightning and hellfire?

[squeeforever]

it will. the only thing is will the lightning and hellfire be able to keep up with you? i would run 6s lipo as well.

[tallyram]

sweet! what else will i need for the build? already have spektrum, need motor, esc, servo, wheels/tires, body. i have lots of questions for mike, but my emails are getting rejected for some reason. is there a phone # that i can try? thanx.

[coolhandcountry]

Did you try pming him as well?

It may be hard to be as fast as them because you will be in front and faster. Hard to tell with them lagging behind.

[tallyram]

i tried pming him as well, yesterday. no reply yet. i'm so ready to dominate. need brushless, must have brushless.

[coolhandcountry]

I sent you a pm. YOu got it.

[tallyram]

thanks coolhand, i'll try again in a day or so. i know he's probably got tons of messages to reply to so i won't bug him for a day or so.

[coolhandcountry]

Ok. If i chat at him between now and then i point him to the pm box. Or even to this thread.

it might take mike a day or two hes been pretty busy i would say with the forum growing as much as it is and all of the stuff being sold.