LMT.2280.Maxx.Load Test & Vids.

[aqwut]

Geocities is dumb... but the vids are now working... I'm suppose to get 25GB/month bandwidth....

[neweuser]

I see. Maybe do some searching and try something new. or call them and tell them you wnat your $$$$$$ back!

[MetalMan]

Still only the one vid is coming up for me. You could try Google Video ( http://www.video.google.com ), there's a 100mb upload limit per video and the quality isn't bad.

[jhautz]

Photobucket rocks. Free and good quality. Not sure on the limits thought?

[aqwut]

... Yahoo fixed this problem.... All the links are working now.... If it doesn't work this time. I'm gonna upload to google.... I have some more vids.. hopefully they work :)

http://www.geocities.com/aqwut/2280_...un_5S_4000.WMV
http://www.geocities.com/aqwut/2280_...un_5S_4000.WMV
http://www.geocities.com/aqwut/2280_...un_5S_4000.WMV

[aqwut]

http://video.google.ca/videoplay?doc...81925316135160

[sjcrss]

they look good man...keep us informed....nice truck by the way

[MetalMan]

That's better :). Can't wait to see it properly geared!

[aqwut]

I have the 23 teeth spur made... just gonna wait for my 5mm drill bit... I'm havin' a hard time finding it locally.... Guess gotta get it from eBay.....23 spur/23 pinion.... that should be good, I hope..... I have a hard time finding a place to test the truck at WOT... all the parking lots are way too small in this small town.... lots of field for flying though....

[MetalMan]

You can also get drill bits from http://www.mcmaster.com . That's where I get my specialty (metric) drill bits from.

[jhautz]

I like the nice low curbs in your neighborhood. In mine they are 8" high :mad:1 and spell certain death if you touch one.:005:



BTW Sweet ride!

wrong forum sry.

[smhertzog]

NICE truck it screams!
Its hard to guage speed on a video what do you think it does?

Be carefull around your dog I wacked mine and messed up his leg. He's a 75lb Collie/Jackrussell mix if it would have been your dog it probably would have killed it.:036:

[aqwut]

I'm not sure.. that's not even fast... motor's only doin' 24000rpms.. :) According to my speed calculator... it's only about 45MPH... but I'm only using 3.3 volt calcuations instead of 3.7 volts... and it's on 5S 4000 10C LiPo packs... I only paid $100 for that pack.. it's max constant discharge is ony 40, and peak at 60Amps.. so it's really not even enough to power that max... I'm afraid to do the test on 24 Cells.... but I will do it for sure... gotta find the space...

[sjcrss]

what 45mph isn't fast enough for you...what are you trying to reach..60mph.....good luck anyways...