Lehner 22 series - Page 3 - RC-Monster Forums

coolhandcountry · 06:12 PM

If I bank the corners. I would never have to slow down. Look like a daytona speed way for rc made of dirt. I Like to have a few jumps and such. I thought about renting a small loader and going to work. I have to lay the track out first.
What kind of motor did promod use?

Serum · 09.15.2005, 06:05 PM

No, no corners Daniel.. It simple starts to look like a circuit again, we are paranoid for circuits.. (our therapist is aware of this..)

Serum · 09.15.2005, 06:05 PM

Promod used a 2240/12 if i recall correctly..

09.15.2005, 06:06 PM

Dang, everyone keeps talking about how 16 cells isn't enough for them, 12 is just crazy enough in my Ofna 9.5 with a Lehner 2800xl. Keep in mind, I usually run on the little street next to my house, it can't be any more than 30' wide and 100yds long.....the 9.5 can be a handful real quick if you're not a good driver. :D

coolhandcountry · 06:14 PM

I run at my moms some time. In the front yard I have about 15 feet wide about 100 yards long as well. Trees one side 8 foot drop the other side.
What turn do you all think I should get. I was thinking 10.

Serum · 09.15.2005, 06:15 PM

I once rammed a large pole on full speed.. It was on a very narrow bicycle path, with trees next to it.. I was doing fine for about 4 times, the last time, my ESC batterie was running empty and the steering servo was acting weird..

(what an excuse, it was just poor driving.. no, really, it was the receiver pack...)

aqwut · 09.15.2005, 06:58 PM

Another thing I'm starting to regret... I should've ordered the 2250 instead of the 1950.... Hey Mike, is it too late to change the Motors for a 2250 instead?... :)

aqwut · 09.15.2005, 07:00 PM

wow...a 2250-7 turn on 10S lips...that would be uber fast.... or a 2250-9 turn on 12S, awesome setup...:)

aqwut · 09.15.2005, 07:05 PM

if the 22 series areso powerful.. I wonder how much power the 3080's would be... hahha 1.6KG..

now that's a real beast...

coolhandcountry · 09.15.2005, 07:14 PM

If you had a bec serum You may not have crashed. :)
The 30 80 would be a beast for sure. Have to upgrade shocks for motor weight. :D

nitrostarter · 09.15.2005, 07:52 PM

8 SuperShocks should do it.

I see we have a couple of Promod, Hiamplitude, and Outkast apprentices here. They could never get enough speed, except they started out with dual lehner basic 4200's and dual hacker 8s. Those were the days.

coolhandcountry · 09.15.2005, 08:05 PM

I have a few concerns. Is the plastic gears on the out put shaft in a emaxx tranny going to take the power. Will I have to put a center diff in my ride? I have the ue rears so that should be good.

RC-Monster Mike · 09.15.2005, 08:38 PM

Quote:

Originally posted by aqwut
Another thing I'm starting to regret... I should've ordered the 2250 instead of the 1950.... Hey Mike, is it too late to change the Motors for a 2250 instead?... :)

well, I have already paid for the motor, but if you would like, I can certainly get the 2250 for you. I am not worried about selling the 1950. For the record, the 1950 will be more than enough already. Heck, the 1930 works very well, and it is only slightly larger than a basic xl motor! The 1940 hardly works up a sweat.

nitrostarter · 09.15.2005, 08:45 PM

Quote:

Originally posted by coolhandcountry
I have a few concerns. Is the plastic gears on the out put shaft in a emaxx tranny going to take the power. Will I have to put a center diff in my ride? I have the ue rears so that should be good.

If you dont go with a center diff, you could look for a set of Ultramaxxed gears. They should hold up to the power.

squeeforever · 09.15.2005, 08:52 PM

good luck finding somebody to let go of them...i've only seen 3 sets on ebay.