Post your Medusa setup here

E-Maxx platform w/custom made, one-off RummyRC chassis:

MR-3680-1600V2SE-5
MMM
20/66
3.8 rims/crime fighters
6s Zippy-H 25c 5000mah

ESC settings:

Punch: 30%
Drag: 0%
Brakes: 30%
Reverse: 50%
Start Power: Medium
Timing: High 15 degrees
Normal brake curve
Simple one point (gentle) slow start ramping to full throttle curve for more precise low to medium throttle control, and still pull's wheelies on demand at half to wide open throttle, good for jump control. Motor never gets over 130 degrees. 20-25 minute run times.

No idea what it's top speed is, all I know is it gets there in a hurry!

I also had it installed in my aftershock, revo, savage X, and a gs storm buggy. I have a hard time keeping rims on my trucks and I've killed many diffs, drive shafts and axles with this motor..

It seems that 3.5hp is too much power for current day nitro/electric RC's to handle.

Cheers.

[e-mike]

Originally Posted by Fr33ze

It seems that 3.5hp is too much power for current day nitro/electric RC's to handle.

this is not my friend said when a pass away him with my e-revo

[snauty]

Caster fusion pro.
Medusa 36 60 2000kv
mmm v3
true rc lipos

[medusa'd maxx]

Losi 8T tekno
3680 2000kv
4 and 5s lipo
MMM
motor gets to 50 c after 15mins
esc and batts stay cool too
13,14 and 15 clutchbells X 48T
Mechanical brakes

Yeah it's overmotored

[Metallover]

I've got the most unique setup ever

CRT .5 pRo
Medusa 36-50-3300
3s Flightpower 30c 3300mah lipo
MM w/ external bec
2point2 gladiators m2 compound
13/46 gearing
jato shocks
temps: 125 motor, 135 MM, 90-100 on the battery.

Only thing special is the look of the shocks, motor mount, and wheels. The rest looks like crap. hehe

Mini Ste
Medusa 36-60-1300
MGM 8s140a
Dimension Engineering sport BEC
Hyperion G3 35c6s2600mah
Stock wheels
Gearing 20/42
Weighs 2.2kgs / <5lbs
GPS@49mph
Closed the front&rear of the motor with duck-tape.
No motor temps. I kan keep my finger on it after 10 minutes of speed runs and bashing in the sand.

[eovnu87435ds]

crt.5
medusa 36-50-3300 v1 5mm
MM/ubec
12/46
3s/4s lipo
stock tires(i forget)

[riverat1540]

spam alert!

[scarletboa]

CEN matrix
medusa 36-60-2000 v2
MMM
13/46
4s lipo (turnigy 5000mah 20c)
various bald tires
temps: 145 motor ??? esc 95 battery in 75-80 degree weather

[What's_nitro?]

Ofna Ultra GTP
LT-6s150a
6s 25C 5k FlightPower Lipo
Medusa 36-80-2000
25/51 Gearing
Ipanema Trackstar GT Slicks
Dimension Engineering Sport BEC

Front Diff: 300K
Rear Diff: 100K
Center Spool

[What's_nitro?]

Wow- Just noticed this is a year-old thread.

GCM RB3 (E-savage bulks, tranny, rest is aftermarket)
Tekno Lektron 2200 (MR 36-60-2200 V2 in a square finned case)
Geared 24/66 M0.8
MM Pro
Turnigy 30-40c 5k 4s pack
Temps negligible on esc/batt
circa 130f on motor after 15 minutes.

I regret I ever sold my Medusa, but here is how I used it.

TC3 built to withstand high power, 90wt shock oil, gold springs, TC body with custom spoiler and side stabilizers.
Mamba Max Pro
Medusa 3650 3300Kv
Turnigy 5s 5000 25C

My best radar was 89mph, but I think if I could have balanced it better it would have gone faster. Every pass thru the radar was sideways.
10 min of high speed dragging back to back and motor temp averaged about 145F

[junkman]

crt.5 3650 3300kv mm 3s
lst2 3680 2000kv mmm 5s
e-revo 3670 2200kv mmm 4s

Savage Flux
V2 Motor, 36-60-3100kv
MMM
4S 5000mah
Bowtie MT's on Hellfire rims

I love my Medusa, its great. I wish I could buy another Medusa, anyone have a 2200kv for sale?