coolhands txt
 

Well I went and got a txt. I thought I would share.
I have put a emaxx trans in and is debating on motor selection.
http://i107.photobucket.com/albums/m...ry/txt/txt.jpg
http://i107.photobucket.com/albums/m...txt/txt002.jpg

NICE leroy...just notice the new catigory!

I Like rock crawlers especially the TXT nice

I figured up that my ratio was to high. I started and made me a new
reduction for it and changed where the motor mounted.
http://i107.photobucket.com/albums/m...txt/txt003.jpg
http://i107.photobucket.com/albums/m...txt/txt004.jpg
http://i107.photobucket.com/albums/m...txt/txt005.jpg

Looking good!:)

Cool txt! Why not use a GD600 for gear reduction? I have put mine through a 22t titan on 10 cells, 55t lathe on 12 cells, and a stock sliver can on 12 cells; it never failed me. (I think I put an HV-maxx on it once too...) I comes stock with a 5mm out put shaft that I milled down to 3mm with no adverse affects... (to accept 3mm pinions)

bye :018:

With the gd600 the motor would have been up against the battery tray.
The battery tray hold the servo for shifting as well. So I wanted to move it
to rear. The motor that is. I took it out for a test run. It was pretty neat.
Nothing like a maxx handles.

Nice lookin truck. How does it perform?

Shaun

great man!!

you even have got a new part on the forum.. :p

Nice! Like the new part of this forum! :)

Motor on truck is a feigao 12s.
I am running a 18.97 schulze esc.
I am running a 2s lipo as well.
Performane is ok. I need lockers.
I do have some body twist in it as well. will see about fixing that as well.
Overall am fairly happy with truck.
Like the way it looks more than anything.

What mah pack are you using, leroy?
Thats one thing for sure ; it looks good!
What are you crawling over these days, dude?! :)

I used a 6000 mah pack. Don't know run time cause didn't have a lvc.
I just played around for about 20 mins or so. I got some bricks.
wood pile. Then I have a stream and some logs in the woods to play on.

Sounds like fun! I bet with 6000mah it will run for a long time.

Well if not just add a 8000 in it. :d
It fits as well. If to slow I can step up on the voltage as well.