RC-Monster Forums - View Single Post - Feigao 7L, Warrior 9920 + 12 GP 3300 cells = hot?

06.26.2005, 02:06 PM

Hi,

the HiTec is fine as far as I can tell. It's working at normal speed and turns the wheels without problems while standing still. Just happens in combination with the throttle problem.

I knew that the motor is really hot, I didn't know that it's too hot. ;)

The buggy is a GS Storm, the new parts are made of carbon fibre.
Some pictures can be found here
http://www.cx4.de/rc/storm01.jpg to http://www.cx4.de/rc/storm08.jpg

Most of them aren't too good, but you get a better idea.

I'm using BEC and the pinion (module 1) has only 13 teeth. So that's pretty low already. The car should be pretty light, about 2.8kg without batts I think..

I'll try to get some more info about the gearing.

	(#4)
felix Guest Posts: n/a	06.26.2005, 02:06 PM Hi, the HiTec is fine as far as I can tell. It's working at normal speed and turns the wheels without problems while standing still. Just happens in combination with the throttle problem. I knew that the motor is really hot, I didn't know that it's too hot. ;) The buggy is a GS Storm, the new parts are made of carbon fibre. Some pictures can be found here http://www.cx4.de/rc/storm01.jpg to http://www.cx4.de/rc/storm08.jpg Most of them aren't too good, but you get a better idea. I'm using BEC and the pinion (module 1) has only 13 teeth. So that's pretty low already. The car should be pretty light, about 2.8kg without batts I think.. I'll try to get some more info about the gearing.