 |
|
|
|
|
|
 |
|
|
|
|
RC-Monster Brushless
Offline
Posts: 2,466
Join Date: Jan 2006
Location: Florida
|
New RCM Batts -
11.12.2008, 11:04 AM
|
|
|
|
|
|
|
|
Site Owner
Offline
Posts: 4,915
Join Date: Nov 2004
Location: PA
|
11.12.2008, 11:15 AM
I have been testing these packs with various cells for about 10 months. They perform better under load than any other cells I have tested, so I decided to start selling them. I am working on labels for them now.
The 2500mah cells hold better than 3 volts per cell under 175 amp load(70c burst rate!) according to my Eagle tree tests! The Eagle tree is accurate to about this load, so I can't get a comparable test on the larger packs, but vs. a comparable FlightPower pack, you can feel the power difference (4s 5000mah felt like I almost added a cell!).
I have other packs, sizes as well - just not enough to list them yet. If anyone has a specific size they need, I should be able to get them - pretty much any size/discharge/capacity.
I will be testing a new 38c continuous 70c burst 2600mah pack soon as well, and should have 3s, 4s, 5s, 6s hard case packs in various capacities eventually as well. :)
|
|
|
|
|
|
|
|
RC-Monster Carbon Fiber
Offline
Posts: 219
Join Date: Jan 2008
Location: France
|
11.12.2008, 11:19 AM
Chinese cells ?
"We'll never have a ROAR legal motor. They're all copies of Novak's design. We're not willing to copy what we consider to be an inferior motor"
- Joe Ford - my new hero
|
|
|
|
|
|
|
|
RC-Monster Brushless
Offline
Posts: 2,466
Join Date: Jan 2006
Location: Florida
|
11.12.2008, 11:22 AM
Sounds like I need to pick up a pack from you when I get my CRT and GTP together. Do you have any packs that will be closer in length to a Flightpower 5000mAh pack?
|
|
|
|
|
|
|
|
Site Owner
Offline
Posts: 4,915
Join Date: Nov 2004
Location: PA
|
11.12.2008, 11:28 AM
Yes, they are chinese cells.
The 5s 4500mah pack is the same overall dimensions as the FP.
http://www.rc-monster.com/proddetail...3150sp255s4500
I have 2s, 3s, 4s and 5s 5000mah and 4s 6000mah packs in the same length as well(some have been tested a few times, but easy enough to get more). :)
|
|
|
|
|
|
|
|
Site Owner
Offline
Posts: 4,915
Join Date: Nov 2004
Location: PA
|
11.12.2008, 11:29 AM
I special ordered the 5s2p for BrianG, so I ordered a couple extra. :)
|
|
|
|
|
|
|
|
RC-Monster Admin
Offline
Posts: 14,609
Join Date: Nov 2005
Location: Des Moines, IA
|
11.12.2008, 12:13 PM
Quote:
Originally Posted by RC-Monster Mike
I special ordered the 5s2p for BrianG, so I ordered a couple extra. :)
|
Now I can finally get my Ultra GTP (10s) and MBX5/CORR (5s) projects finished!
|
|
|
|
|
|
|
|
RC-Monster Carbon Fiber
Offline
Posts: 377
Join Date: Jun 2005
Location: Minnesota
|
11.12.2008, 12:05 PM
I am very interested in the hard case lipos, that's a great price! When do you expect to get them labeled? I know our local tracks probably wont allow them if they are not labeled with the specs.
|
|
|
|
|
|
|
|
RC-Monster Titanium
Offline
Posts: 1,803
Join Date: Aug 2005
Location: arkansas
|
11.12.2008, 12:05 PM
you told me about these cells a few months back when i we were on the phone talking about the nue endbell covers not fitting, i was beginning to wonder if you were ever gonna start selling them to us...
these are teh ones you were running as a 2500 5s pack in your crt.5 isnt it?
|
|
|
|
|
|
|
|
Site Owner
Offline
Posts: 4,915
Join Date: Nov 2004
Location: PA
|
11.12.2008, 12:08 PM
When someone buys a pack, they will have an appropriate label. :)
Yes, Ross - the 5s 2500s are the packs I use in my crt.5. They even survive an 8 minute run in a full size truggy(they are that good).
|
|
|
|
|
|
|
|
RC-Monster Dual Brushless
Offline
Posts: 3,794
Join Date: May 2005
Location: georgia
|
11.13.2008, 12:51 AM
Quote:
Originally Posted by RC-Monster Mike
When someone buys a pack, they will have an appropriate label. :)
Yes, Ross - the 5s 2500s are the packs I use in my crt.5. They even survive an 8 minute run in a full size truggy(they are that good).
|
Mike, What combo are you running in your CRT.5? I have been wanting to run my GT conversion setup in a CRT.5, Its a lehner basic XL 1200 motor w/quark 80 and 5s 2500 25c flightpower lipo. I only have one battery for this setup, So with your endorsement I plan to buy some of these 5s 2500's and other sizes soon. Whats the possiblity of higher capacities? Like 7000 to 8000mah
Work because i gotta, play because i wanna
People here hate Nitro, I love it. I start it, run it about 50 ft from me and it dies, I go after it. Perfect exercise
|
|
|
|
|
|
|
|
RC-Monster Titanium
Offline
Posts: 1,803
Join Date: Aug 2005
Location: arkansas
|
11.12.2008, 12:14 PM
hmmm sound like perfect packs for the crt.5s and the ls10s ultra light weight and small too. that 5s 5000 is only 2mm too wide to fit in my tray or id buy one, too bad im running this tiny custom tray.
|
|
|
|
|
|
|
|
RC-Monster Brushless
Offline
Posts: 2,466
Join Date: Jan 2006
Location: Florida
|
11.12.2008, 12:22 PM
Mike, Do you have a 3S 2500 pack available? I'd like to try it in my 1509/1Y powered Slash or my VXL Rustler.
|
|
|
|
|
|
|
|
Site Owner
Offline
Posts: 4,915
Join Date: Nov 2004
Location: PA
|
11.12.2008, 12:31 PM
I have a couple 3s2p packs(5000mah), but I don't think I have any 3s1p at the moment. :)
Last edited by RC-Monster Mike; 11.12.2008 at 12:40 PM.
|
|
|
|
|
|
|
|
RC-Monster Brushless
Offline
Posts: 2,466
Join Date: Jan 2006
Location: Florida
|
11.12.2008, 01:26 PM
Quote:
Originally Posted by RC-Monster Mike
I have a couple 3s2p packs(5000mah), but I don't think I have any 3s1p at the moment. :)
|
What length are the 3S2p 5000's? Also, how much $?
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
Powered by vBulletin® Version 3.8.11 Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
|
 |