RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > General Electric

Reply
 
Thread Tools Rate Thread Display Modes
How are Zippy Lipos???
Old
  (#1)
Revracer
RC-Monster Carbon Fiber
 
Revracer's Avatar
 
Offline
Posts: 323
Join Date: Nov 2006
How are Zippy Lipos??? - 07.07.2008, 01:54 PM

How are these two Zippy lipos? I might get the 4s 25c 4000 or twin 4300 20c 2s packs. Or maybe one of each I'm not sure yet because I don't kknow how good they are but they are a steal on price IMO. How do they perform though? All the reviews seem great? Anyone running these? I know thw 2s looks sloppy but hey for only $40 you can't have everything right? I can always put some shrink wrap over it to clean it up a bit... Thanks

http://www.hobbycity.com/hobbycity/s...5C_Lipoly_Pack

http://www.hobbycity.com/hobbycity/s...Ah_2S1P_20-30C
   
Reply With Quote
Old
  (#2)
wallot
RC-Monster Titanium
 
wallot's Avatar
 
Offline
Posts: 1,025
Join Date: Jan 2007
Location: Prague, Czech Republic
07.07.2008, 02:14 PM

i use them as well my friends do. they hold balance very well. 5Ah 5S pack has more power than truerc 8Ah pack. i still need to run them with eagletree on as i am busy with nitro racing, but so far they perform great.


Radek
V4 D8 - RX8, XERUN 4168SD
F1-09 - Tekin RS Pro, 17.5t Redline, 2S LiPo
Sakura Zero S - LRP, Saturn 20T, 2S LiPo
*EX-10 Eurus*
 Send a message via ICQ to wallot  
Reply With Quote
Old
  (#3)
Revracer
RC-Monster Carbon Fiber
 
Revracer's Avatar
 
Offline
Posts: 323
Join Date: Nov 2006
07.07.2008, 02:27 PM

So the 4300 2s packs would be good? Do well in a Revo wired in series for 4s geared for about 40-45?
   
Reply With Quote
Old
  (#4)
maneba
RC-Monster Carbon Fiber
 
Offline
Posts: 79
Join Date: Apr 2008
Location: Milano ITALY
08.02.2008, 03:53 PM

I use for two months Zippy 3S 5000 mAh in a e-revo with feigao 8XL and MM.
They worked well. Good punch and good to hold capacity.
Now i've sold them to buy Zippy R (more C) 4S 4800.
   
Reply With Quote
Old
  (#5)
big greg
Guest
 
Posts: n/a
08.02.2008, 04:03 PM

get the zippy-r 4800 25c's there great and only 80$ there great have just as much punch as my flightpower pack
   
Reply With Quote
Old
  (#6)
tc3_racer_001
RC-Monster Carbon FIBRE NOT FIBER!
 
tc3_racer_001's Avatar
 
Offline
Posts: 701
Join Date: Apr 2008
Location: Brisbane, Australia
08.03.2008, 02:46 AM

so the performance is good, but how long have people owned these? will they drop in performance quickly? im not about to waste $80 on a pack only to have it rendered useless in a matter of months.


hyper 8.5 pro SOLD!
Monster Max Still Working...
JR SX3
Neu 1512 2D/S
12t pinion
4800 zippy-r


XRAY xt8
MMM
Neu 1512 3D/F
11t pinion
6s 5000 Flightmax/ 4s 4000 Turningy
  Send a message via MSN to tc3_racer_001  
Reply With Quote
Old
  (#7)
maneba
RC-Monster Carbon Fiber
 
Offline
Posts: 79
Join Date: Apr 2008
Location: Milano ITALY
08.03.2008, 04:17 AM

Quote:
Originally Posted by tc3_racer_001 View Post
so the performance is good, but how long have people owned these? will they drop in performance quickly? im not about to waste $80 on a pack only to have it rendered useless in a matter of months.
About 30 discharge in two months for each pack and i see no loss of performance. I charge the packs at 5,5-6A each time. this is my experience.
   
Reply With Quote
Old
  (#8)
tc3_racer_001
RC-Monster Carbon FIBRE NOT FIBER!
 
tc3_racer_001's Avatar
 
Offline
Posts: 701
Join Date: Apr 2008
Location: Brisbane, Australia
08.03.2008, 05:20 PM

thanks :) i will buy one then :D

can you also tell me, what is the mimimum voltage you have seen under load with a fresh pack? (my 4s a123 drop down to 10.2v!!) under 102A spikes.


hyper 8.5 pro SOLD!
Monster Max Still Working...
JR SX3
Neu 1512 2D/S
12t pinion
4800 zippy-r


XRAY xt8
MMM
Neu 1512 3D/F
11t pinion
6s 5000 Flightmax/ 4s 4000 Turningy
  Send a message via MSN to tc3_racer_001  
Reply With Quote
Old
  (#9)
maneba
RC-Monster Carbon Fiber
 
Offline
Posts: 79
Join Date: Apr 2008
Location: Milano ITALY
08.03.2008, 06:42 PM

I don't have an istrument to read that value, sorry.
   
Reply With Quote
Old
  (#10)
RUSTY XL-5
RC-Monster Carbon Fiber
 
RUSTY XL-5's Avatar
 
Offline
Posts: 323
Join Date: Feb 2008
Location: Durham, N.C.
08.06.2008, 04:28 PM

Quote:
Originally Posted by big greg View Post
get the zippy-r 4800 25c's there great and only 80$ there great have just as much punch as my flightpower pack
Got a question for ya. :)

On HobbyCity's site they say that the zippy-r 4800 25c is 170mm long (too long to fit in my rusty) But then I saw their pic:

http://www.hobbycity.com/hobbycity/s...00mAh_25C_3S1P

It looks like to me that the wires/shrink stick out from the end. So are the cells really 170mm or is that size including the bulge of the wires/shrink?


I will spank a nitro any day...guaranteed. :)
   
Reply With Quote
Old
  (#11)
big greg
Guest
 
Posts: n/a
08.06.2008, 04:30 PM

hey rusty, i will check when i get home
   
Reply With Quote
Old
  (#12)
RUSTY XL-5
RC-Monster Carbon Fiber
 
RUSTY XL-5's Avatar
 
Offline
Posts: 323
Join Date: Feb 2008
Location: Durham, N.C.
08.06.2008, 04:32 PM

Thanks a ton.


I will spank a nitro any day...guaranteed. :)
   
Reply With Quote
Old
  (#13)
Byte
Guest
 
Posts: n/a
08.06.2008, 04:38 PM

Yeah, thats strange, I also want to buy a 3s LiPo for my Rustler VXL, my Nimh batteries are 13,5cm long, and the LiPo's from Zippy 16cm?
I'm thinking about buying this one: http://www.hobbycity.com/hobbycity/s...0C_Lipoly_Pack
   
Reply With Quote
Old
  (#14)
RUSTY XL-5
RC-Monster Carbon Fiber
 
RUSTY XL-5's Avatar
 
Offline
Posts: 323
Join Date: Feb 2008
Location: Durham, N.C.
08.06.2008, 05:19 PM

I was also interested in the one that you just linked, but I think I'll have to get the rcm carbon chassis first for it to fit.


I will spank a nitro any day...guaranteed. :)
   
Reply With Quote
Old
  (#15)
Byte
Guest
 
Posts: n/a
08.06.2008, 05:48 PM

Quote:
Originally Posted by RUSTY XL-5 View Post
I was also interested in the one that you just linked, but I think I'll have to get the rcm carbon chassis first for it to fit.
Just if you don't know, under the ESC the rustler has a little bit of space. If you take that plastic thingy from the chassis the LiPo must fit in. ( Maybe I'm gonna do that )

Sorry for my bad Englisch, Im dutch
   
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com