esc question for a HV setup.. (no novak, HighVoltage...)

[Serum]

The 2240 thread of Promod got me thinking.

I am thinking about buying a low kv 2240 and a high voltage speedo.

now here is the question;

If i use a mechanical brake, instead of the motorbrake, is it possible to use a speedcontroller that is ment to be put in a plane/boat?

Something like the Master 135-O by hacker.. 135A with a maxx of 32 cells.

Or the Master 77-O (30 cells 77Amps..)

The braking is a big stress for the speedo, and i am going to use a mechanical brake..

[Serum]

And one other thing;

Mike, can you get those controllers?

[RC-Monster Mike]

I don't currently have a source to get the Hacker controllers. Also, I think the best option would be to get a car controller (car software). I have 30 cell BK controllers that will easily hande that setup even if you decide to use controller braking.

[Promod]

Serum,
In the early days of brushless before there were any High cell car speed controls I tried a few different boat controllers. All ended in the same way, A HUGE FIREBALL!!
The boat speed controls Tried didn't even have brakes. I'm really not sure why the boat speed controls smoked but I would stick with a car speed control.

Thank you,
Promod

[Serum]

Fireballs are nice.. But these fireballs are rather expensive..

I can choose between the BK 3095 and the 30120. I think i will buy the 30120, just to be save.

Those last 25A don't cost that much extra..