BL input needed

[Twisted]

Thanks for the gearing chart..! I just have NO experience with Brushless.. So I just wanted to know where to start. This has a lot to do with the design of my mounts and the reduction in gearing will affect what I use a tranny. I think I am gonna scrap the idea of using the stock savage tranny and all that is there. I will use the skid plate as my pan that all the motor and gear box is bolted to and eliminate the tranny, engine plate, radio box, ect.. This is at least 3lb worth of crap..

I am going with my original thought and that is a center diff. Just need to find out if I wanna use one off the shelf or if I am actually gonna make a gearbox.. Thats why I wanted a gearing chart of some type..

I have the TVPs designed for this.. But they are basicaly braces for the pan style chassis it will become..

Now I need to read and see what the majority of guys are using for motors, ESC's, and battery power (lipo).. Then I will design around that for the final prototyping...

Thanks for all your help Serum.. I hear your the man around here.. If you have a good place to start, or need any machining done, just drop a line on me.. mckaseye@yahoo.com